Black+Decker Display module or control board failure

Microwave display is dim, flickering, or partially missing segments.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging LED/VFD display, Loose display connector, Failing control board power supply, Heat damage to display area

Safety first: Unplug the microwave before accessing the control panel.

Check for heat/steam exposure:
- Ensure the microwave is not installed above a range without proper venting, which can overheat the control area.
Inspect display connections:
- Remove the control panel.
- Reseat the connectors between the display module and main board.

If the display remains dim or segments are missing, the display module or entire control board will need replacement.

Medium 3/5

Display Module / Control Board

Check Price on Amazon

We may earn a commission from links on this page.