E08
Princess
Cooling Fan or Airflow Fault
Microwave shows E08 and may shut down mid-cycle; fan may continue running.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed cavity cooling fan motor, Obstructed air ducts or blocked vents, Loose fan wiring connector, Faulty fan driver circuit on control board
How to Fix / Troubleshooting
Safety: Unplug the microwave before inspection.
- Check external vents: Ensure rear and side vents are not blocked by walls, cabinets, or objects. Clean dust and grease from grills.
- Listen for fan: Start a short cycle and listen for the cooling fan at the back or side. If you do not hear airflow, the fan may have failed (do not run repeatedly if E08 appears).
- Allow cooling: If the unit feels hot externally, let it cool for 30 minutes before retrying.
- Professional repair: Replacement of the cooling fan motor or repair of the fan circuit on the PCB is typically required and should be done by a technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements