Microwave displays E07 and the turntable does not rotate during cooking.

Safety: Unplug the microwave before working underneath or inside the cabinet.

Checks:

• 1. Remove and clean: Take out the glass tray and roller ring. Clean both and the cavity floor. Check for food debris or broken glass that may jam rotation.
• 2. Inspect coupler: Check the plastic coupler that fits into the motor shaft. Ensure it is not cracked or stripped and that it sits firmly.
• 3. Test without load: With the tray removed, plug in and start a short cycle. Observe whether the coupler turns. If it does, the issue is with the tray or ring; if not, the motor or wiring is suspect.
• 4. Motor access (for DIYers): Unplug, remove the bottom panel (on countertop models) to access the turntable motor. Check for loose connectors and test the motor for continuity with a multimeter.

If the motor is open-circuit or seized, replace it with a compatible Vida turntable motor. Ensure the new motor is mounted in the same orientation and that the coupler engages properly.