Binatone
No Power / Dead Appliance
Multicooker does not power on at all; no lights or display when plugged in.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on PCB, Faulty mains power cord, Failed power supply section on main PCB, Loose neutral or live connection at terminal block
How to Fix / Troubleshooting
Safety first: Ensure the cooker is unplugged before opening the housing. Only persons familiar with mains safety should perform internal checks.
- Check outlet and cord: Test the wall outlet with another appliance. Inspect the Binatone power cord for visible damage. Replace the cord if any cuts or burns are found.
- Test power button: Some models have a mechanical power switch at the side or rear. Ensure it is in the ON position.
- Internal fuse: Remove the bottom cover and locate the inline fuse or PCB‑mounted fuse near the mains input. If blown, replace with the same type and rating. If it blows again immediately, there is a short that must be diagnosed.
- Inspect PCB: Look for burnt tracks or components in the power supply area. If present, replace the main control PCB.
- Professional repair: If you are not experienced with mains electronics, have a qualified technician test and replace the power supply components.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Internal PCB Fuse / Power Cord
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements