Binatone
Binatone Multicookers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Multicooker will not start a program and displays E0 immediately after pressing START.
Inner Pot Not Detected / Temperature Sensor Contact Fault
E1
Display shows E1 and cooking does not start or stops shortly after starting.
Open-Circuit Temperature Sensor (NTC) Under Heating Plate
E2
Multicooker beeps and shows E2 during preheat or shortly after starting a cooking program.
Short-Circuit Temperature Sensor (NTC) Under Heating Plate
E3
Display shows E3 and the cooker stops heating or refuses to start high‑temperature programs like FRY or BAKE.
Overtemperature Protection / Overheat Detected at Heating Plate
E4
E4 appears on the display and the cooker will not start or stops mid‑cycle, often when using pressure or high‑heat modes.
Lid / Pressure Sensor Fault or Overpressure Condition
E5
E5 error appears and the cooker does not build pressure or stops during a pressure cooking program.
Pressure Not Reached / Pressure Leakage Detected
E6
Display shows E6 and the cooker does not heat or shuts down quickly after starting.
Heating Element Circuit Fault
E7
E7 appears and the cooker fails to start or stops unexpectedly, often when using delayed start or keep‑warm.
Main Control PCB Fault / Internal Communication Error
E8
E8 is displayed and the cooker does not respond to button presses or cannot start any program.
Keypad / Touch Panel Failure
E9
E9 appears during operation, often accompanied by unusual noises or intermittent heating.
Power Supply / Voltage Detection Error
Err
Display shows 'Err' or 'Error' and beeps continuously; no program can be selected.
Generic System Error / Self-Test Failure
Symptom
Beeping is continuous or occurs randomly without user input.
Alarm / Buzzer Circuit Malfunction
Symptom
Buttons are hard to press or do not register unless pressed very firmly.
Worn or Contaminated Membrane Keypad
Symptom
Display and lights flicker or reset during cooking; cooker may restart programs unexpectedly.
Intermittent Power / Loose Connection
Symptom
Display segments are missing or unreadable; some numbers or icons do not light.
Display Module / Segment Failure
Symptom
Display works but heating does not start; programs count down time without the pot getting hot.
Heater Not Energizing
Symptom
Food is consistently overcooked or burns at the bottom even on standard programs.
Overheating / High Temperature Regulation Fault
Symptom
Food is consistently undercooked even when using the same program and time as before.
Insufficient Heating / Low Temperature Regulation
Symptom
Inner pot coating is peeling or scratched; food sticks badly and may show black flakes.
Damaged Nonstick Coating
Symptom
Keep Warm function overheats food, causing it to dry out or burn.
Keep Warm Temperature Too High
Symptom
Lid does not lock properly; cooker refuses to start pressure programs or leaks steam around the lid.
Lid Lock Misalignment / Worn Lock Components
Symptom
Lid will not open after cooking; it feels jammed even after the cooker has cooled.
Stuck Lid Lock / Float Valve Not Dropping
Symptom
Multicooker builds pressure but then releases steam from the safety valve or around the lid unexpectedly.
Overpressure Safety Release Activation
Symptom
Multicooker does not power on at all; no lights or display when plugged in.
No Power / Dead Appliance
Symptom
Multicooker heats but never reaches pressure; steam constantly escapes from the lid area.
Pressure Leakage at Lid
Symptom
Multicooker powers on but will not start any program; pressing START does nothing or beeps without beginning cooking.
Start Circuit / Lid Lock Interlock Not Engaged
Symptom
Multicooker switches to KEEP WARM too early, before food is fully cooked.
Premature Program Termination / False Temperature Reached
Symptom
Outer body of the cooker becomes excessively hot to touch during operation.
Insulation / Thermal Shielding Degradation
Symptom
Persistent unpleasant odor from inside the cooker, even after cleaning.
Odor Retention / Contamination
Symptom
Rattling or metallic noise from inside the lid when steam is released.
Loose Lid Components / Valve Hardware
Symptom
Steam or water leaks from the steam release valve area even when set to SEAL.
Faulty Steam Release Valve / Float Valve Assembly
Symptom
Strong burning smell or visible smoke from the base or lid during operation.
Overheating / Electrical Burning
Symptom
Timer or delayed start does not work; cooker starts immediately or not at all.
Timer / Clock Function Fault
Symptom
Unusual loud clicking, buzzing, or humming noises from the base during operation.
Mechanical Noise from Heating Plate or Relay
Symptom
Water or broth leaks from the bottom of the cooker onto the counter.
Internal Liquid Leak
Symptom
Water or condensation drips from the side of the cooker or onto the countertop during or after cooking.
Condensation Management / Gasket or Collector Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Multicooker will not start a program and displays E0 immediately after pressing START.
|
Inner Pot Not Detected / Temperature Sensor Contact Fault | View Details |
| E1 |
Display shows E1 and cooking does not start or stops shortly after starting.
|
Open-Circuit Temperature Sensor (NTC) Under Heating Plate | View Details |
| E2 |
Multicooker beeps and shows E2 during preheat or shortly after starting a cooking program.
|
Short-Circuit Temperature Sensor (NTC) Under Heating Plate | View Details |
| E3 |
Display shows E3 and the cooker stops heating or refuses to start high‑temperature programs like FRY or BAKE.
|
Overtemperature Protection / Overheat Detected at Heating Plate | View Details |
| E4 |
E4 appears on the display and the cooker will not start or stops mid‑cycle, often when using pressure or high‑heat modes.
|
Lid / Pressure Sensor Fault or Overpressure Condition | View Details |
| E5 |
E5 error appears and the cooker does not build pressure or stops during a pressure cooking program.
|
Pressure Not Reached / Pressure Leakage Detected | View Details |
| E6 |
Display shows E6 and the cooker does not heat or shuts down quickly after starting.
|
Heating Element Circuit Fault | View Details |
| E7 |
E7 appears and the cooker fails to start or stops unexpectedly, often when using delayed start or keep‑warm.
|
Main Control PCB Fault / Internal Communication Error | View Details |
| E8 |
E8 is displayed and the cooker does not respond to button presses or cannot start any program.
|
Keypad / Touch Panel Failure | View Details |
| E9 |
E9 appears during operation, often accompanied by unusual noises or intermittent heating.
|
Power Supply / Voltage Detection Error | View Details |
| Err |
Display shows 'Err' or 'Error' and beeps continuously; no program can be selected.
|
Generic System Error / Self-Test Failure | View Details |
| – |
Beeping is continuous or occurs randomly without user input.
|
Alarm / Buzzer Circuit Malfunction | View Details |
| – |
Buttons are hard to press or do not register unless pressed very firmly.
|
Worn or Contaminated Membrane Keypad | View Details |
| – |
Display and lights flicker or reset during cooking; cooker may restart programs unexpectedly.
|
Intermittent Power / Loose Connection | View Details |
| – |
Display segments are missing or unreadable; some numbers or icons do not light.
|
Display Module / Segment Failure | View Details |
| – |
Display works but heating does not start; programs count down time without the pot getting hot.
|
Heater Not Energizing | View Details |
| – |
Food is consistently overcooked or burns at the bottom even on standard programs.
|
Overheating / High Temperature Regulation Fault | View Details |
| – |
Food is consistently undercooked even when using the same program and time as before.
|
Insufficient Heating / Low Temperature Regulation | View Details |
| – |
Inner pot coating is peeling or scratched; food sticks badly and may show black flakes.
|
Damaged Nonstick Coating | View Details |
| – |
Keep Warm function overheats food, causing it to dry out or burn.
|
Keep Warm Temperature Too High | View Details |
| – |
Lid does not lock properly; cooker refuses to start pressure programs or leaks steam around the lid.
|
Lid Lock Misalignment / Worn Lock Components | View Details |
| – |
Lid will not open after cooking; it feels jammed even after the cooker has cooled.
|
Stuck Lid Lock / Float Valve Not Dropping | View Details |
| – |
Multicooker builds pressure but then releases steam from the safety valve or around the lid unexpectedly.
|
Overpressure Safety Release Activation | View Details |
| – |
Multicooker does not power on at all; no lights or display when plugged in.
|
No Power / Dead Appliance | View Details |
| – |
Multicooker heats but never reaches pressure; steam constantly escapes from the lid area.
|
Pressure Leakage at Lid | View Details |
| – |
Multicooker powers on but will not start any program; pressing START does nothing or beeps without beginning cooking.
|
Start Circuit / Lid Lock Interlock Not Engaged | View Details |
| – |
Multicooker switches to KEEP WARM too early, before food is fully cooked.
|
Premature Program Termination / False Temperature Reached | View Details |
| – |
Outer body of the cooker becomes excessively hot to touch during operation.
|
Insulation / Thermal Shielding Degradation | View Details |
| – |
Persistent unpleasant odor from inside the cooker, even after cleaning.
|
Odor Retention / Contamination | View Details |
| – |
Rattling or metallic noise from inside the lid when steam is released.
|
Loose Lid Components / Valve Hardware | View Details |
| – |
Steam or water leaks from the steam release valve area even when set to SEAL.
|
Faulty Steam Release Valve / Float Valve Assembly | View Details |
| – |
Strong burning smell or visible smoke from the base or lid during operation.
|
Overheating / Electrical Burning | View Details |
| – |
Timer or delayed start does not work; cooker starts immediately or not at all.
|
Timer / Clock Function Fault | View Details |
| – |
Unusual loud clicking, buzzing, or humming noises from the base during operation.
|
Mechanical Noise from Heating Plate or Relay | View Details |
| – |
Water or broth leaks from the bottom of the cooker onto the counter.
|
Internal Liquid Leak | View Details |
| – |
Water or condensation drips from the side of the cooker or onto the countertop during or after cooking.
|
Condensation Management / Gasket or Collector Issue | View Details |
No matching codes found
Advertisements