Eldom
Temperature / Pressure Calibration Drift
Food is consistently undercooked or overcooked compared to the selected program.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging NTC temperature sensor, Pressure sensor out of calibration, Firmware mismatch for region, Deformed inner pot affecting heat transfer
How to Fix / Troubleshooting
Safety: Allow the cooker to cool before internal checks.
- Verify recipe and fill: Confirm you are using the correct water-to-food ratios and that altitude is considered (higher altitude may require longer cooking).
- Check inner pot: Ensure the pot bottom is flat and not warped. Replace if deformed.
- Test with manual mode: Use a manual pressure or temperature setting and compare actual results with expectations. Large deviations suggest sensor issues.
If cooking performance is significantly off despite correct usage, the temperature or pressure sensors may need replacement, or the main control PCB may require service.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Bottom NTC Temperature Sensor Assembly / Pressure Sensor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements