Electrolux
Display / User Interface Failure
Display is completely blank but heater still seems to work (e.g., unit heats when plugged in).
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted display module, Stuck relay or triac causing uncontrolled heating, Failed microcontroller output to display, Damaged display ribbon cable
How to Fix / Troubleshooting
Safety first: Unplug immediately if the cooker heats without control. This is a hazardous condition.
- Do not use: Do not attempt to operate the cooker without a functioning display and controls.
- Internal inspection (advanced): Check the display connector and ribbon cable for disconnection or damage.
- Look for burnt components: Inspect the control PCB for obvious damage around the display driver and heater control sections.
- This fault typically requires replacement of the main control PCB and possibly the display module. Contact an authorized Electrolux service center.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Display Module / Main Control PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements