Electrolux Multicookers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Multicooker will not start a cooking program and displays E1 shortly after power-on or when pressing Start.
Lid Position / Lid Lock Detection Fault
E10
E10 appears and the cooker does not respond to button presses or behaves erratically.
Control Panel / Keypad Communication Error
E11
E11 error appears when trying to start a program that uses delayed start or timer functions.
Real-Time Clock / Timer Circuit Fault
E12
E12 is displayed and the cooker stops mid-cycle, often when switching from heating to keep-warm.
Power Supply / Low Voltage Detection
E13
E13 appears and the cooker may show abnormal temperature readings or shut off unexpectedly.
Lid Temperature Sensor Fault
E14
E14 error appears when starting or during a steam or sauté program; cooker may not heat properly.
Secondary Overheat / Sauté Temperature Protection
E15
E15 is displayed and the cooker may not respond; sometimes occurs after a power outage during cooking.
Firmware / Program Memory Error
E2
Multicooker beeps and shows E2, will not start or stops shortly after starting a program.
Temperature Sensor (NTC) Open Circuit
E3
Display shows E3 during preheat or cooking; cooker stops heating and may beep continuously.
Temperature Sensor (NTC) Short Circuit / Overtemperature Detection
E4
E4 appears on the display and the multicooker refuses to start pressure or high-heat programs.
Pressure Sensor / Pressure Switch Fault
E5
E5 error appears during pressure build-up; cooker stops and may release steam prematurely.
Overpressure / Pressure Limit Protection Triggered
E6
E6 is displayed and the cooker does not heat; sometimes accompanied by a clicking relay sound.
Heating Circuit / Triac / Relay Fault
E7
E7 appears and the cooker may not detect the inner pot or refuses to start cooking.
Inner Pot Detection / Weight Sensor Fault
E8
E8 error appears during pressure cooking; unit may not reach or maintain pressure.
Pressure Not Reached / Leakage Detected
E9
E9 is displayed and the cooker stops heating; may occur after a long cooking cycle or if ventilation is blocked.
Overheat Protection / Thermal Cutoff Triggered
Symptom
Burning smell during cooking, sometimes with dark residue on the heater plate.
Food Spillage / Carbonization on Heater
Symptom
Buttons on the control panel are unresponsive or require very hard presses.
Keypad / Touch Panel Failure
Symptom
Condensation dripping from the lid onto the countertop or control panel.
Condensate Management / Collector Overflow
Symptom
Cooking times are much longer than expected; food remains undercooked after the program ends.
Insufficient Heating / Low Temperature
Symptom
Display and lights flicker or dim during cooking.
Unstable Power / Loose Electrical Connection
Symptom
Display is completely blank but heater still seems to work (e.g., unit heats when plugged in).
Display / User Interface Failure
Symptom
Excessive steam or liquid spurting from the steam release valve during pressure cooking.
Foaming / Overboil Through Valve
Symptom
Exterior of the multicooker becomes excessively hot to touch during operation.
Insulation / Thermal Shielding Degradation
Symptom
Food consistently burns or sticks to the bottom of the inner pot.
Localized Overheating / Non-Stick Coating Failure
Symptom
High-pitched whine or buzzing sound from the base during operation.
Electrical Noise / Vibrating Coil or Fan
Symptom
Inner pot coating is peeling or flaking into food.
Non-Stick Coating Degradation
Symptom
Keep Warm function overheats food, causing it to dry out or burn.
Keep-Warm Temperature Regulation Fault
Symptom
Lid does not lock properly; pressure builds but steam escapes around the lid lock area.
Lid Lock / Safety Mechanism Malfunction
Symptom
Lid will not open after cooking; float valve appears stuck in the up position even after cooling.
Stuck Float Valve / Residual Pressure
Symptom
Liquid leaking from the bottom of the multicooker onto the countertop.
Internal Leak / Condensate Drain Issue
Symptom
Multicooker does not power on at all; no lights or display when plugged in.
No Power / Dead Appliance
Symptom
Multicooker heats but never reaches pressure; steam constantly escapes from the lid.
Pressure Leakage / Inability to Seal
Symptom
Multicooker makes loud clicking, popping, or metallic noises during heating.
Thermal Expansion / Pot and Heater Noise
Symptom
Multicooker powers on but will not start any program; pressing Start does nothing.
Start Circuit / Safety Interlock Not Engaged
Symptom
Multicooker vibrates excessively or moves slightly on the countertop during operation.
Mechanical Vibration / Imbalance
Symptom
Programs end too early or switch to Keep Warm before food is cooked.
Premature Program Termination
Symptom
Rust spots appearing on the inner pot or inside the cooking chamber.
Corrosion / Coating Damage
Symptom
Strong unpleasant odor from inside the multicooker even after cleaning.
Odor Retention / Bacterial Growth
Symptom
Visible mold or residue in hard-to-reach areas of the lid or around the gasket.
Microbial Contamination / Poor Cleaning Access
Symptom
Water or condensation leaking from around the lid edge during cooking.
Lid Perimeter Leak
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Multicooker will not start a cooking program and displays E1 shortly after power-on or when pressing Start.
|
Lid Position / Lid Lock Detection Fault | View Details |
| E10 |
E10 appears and the cooker does not respond to button presses or behaves erratically.
|
Control Panel / Keypad Communication Error | View Details |
| E11 |
E11 error appears when trying to start a program that uses delayed start or timer functions.
|
Real-Time Clock / Timer Circuit Fault | View Details |
| E12 |
E12 is displayed and the cooker stops mid-cycle, often when switching from heating to keep-warm.
|
Power Supply / Low Voltage Detection | View Details |
| E13 |
E13 appears and the cooker may show abnormal temperature readings or shut off unexpectedly.
|
Lid Temperature Sensor Fault | View Details |
| E14 |
E14 error appears when starting or during a steam or sauté program; cooker may not heat properly.
|
Secondary Overheat / Sauté Temperature Protection | View Details |
| E15 |
E15 is displayed and the cooker may not respond; sometimes occurs after a power outage during cooking.
|
Firmware / Program Memory Error | View Details |
| E2 |
Multicooker beeps and shows E2, will not start or stops shortly after starting a program.
|
Temperature Sensor (NTC) Open Circuit | View Details |
| E3 |
Display shows E3 during preheat or cooking; cooker stops heating and may beep continuously.
|
Temperature Sensor (NTC) Short Circuit / Overtemperature Detection | View Details |
| E4 |
E4 appears on the display and the multicooker refuses to start pressure or high-heat programs.
|
Pressure Sensor / Pressure Switch Fault | View Details |
| E5 |
E5 error appears during pressure build-up; cooker stops and may release steam prematurely.
|
Overpressure / Pressure Limit Protection Triggered | View Details |
| E6 |
E6 is displayed and the cooker does not heat; sometimes accompanied by a clicking relay sound.
|
Heating Circuit / Triac / Relay Fault | View Details |
| E7 |
E7 appears and the cooker may not detect the inner pot or refuses to start cooking.
|
Inner Pot Detection / Weight Sensor Fault | View Details |
| E8 |
E8 error appears during pressure cooking; unit may not reach or maintain pressure.
|
Pressure Not Reached / Leakage Detected | View Details |
| E9 |
E9 is displayed and the cooker stops heating; may occur after a long cooking cycle or if ventilation is blocked.
|
Overheat Protection / Thermal Cutoff Triggered | View Details |
| – |
Burning smell during cooking, sometimes with dark residue on the heater plate.
|
Food Spillage / Carbonization on Heater | View Details |
| – |
Buttons on the control panel are unresponsive or require very hard presses.
|
Keypad / Touch Panel Failure | View Details |
| – |
Condensation dripping from the lid onto the countertop or control panel.
|
Condensate Management / Collector Overflow | View Details |
| – |
Cooking times are much longer than expected; food remains undercooked after the program ends.
|
Insufficient Heating / Low Temperature | View Details |
| – |
Display and lights flicker or dim during cooking.
|
Unstable Power / Loose Electrical Connection | View Details |
| – |
Display is completely blank but heater still seems to work (e.g., unit heats when plugged in).
|
Display / User Interface Failure | View Details |
| – |
Excessive steam or liquid spurting from the steam release valve during pressure cooking.
|
Foaming / Overboil Through Valve | View Details |
| – |
Exterior of the multicooker becomes excessively hot to touch during operation.
|
Insulation / Thermal Shielding Degradation | View Details |
| – |
Food consistently burns or sticks to the bottom of the inner pot.
|
Localized Overheating / Non-Stick Coating Failure | View Details |
| – |
High-pitched whine or buzzing sound from the base during operation.
|
Electrical Noise / Vibrating Coil or Fan | View Details |
| – |
Inner pot coating is peeling or flaking into food.
|
Non-Stick Coating Degradation | View Details |
| – |
Keep Warm function overheats food, causing it to dry out or burn.
|
Keep-Warm Temperature Regulation Fault | View Details |
| – |
Lid does not lock properly; pressure builds but steam escapes around the lid lock area.
|
Lid Lock / Safety Mechanism Malfunction | View Details |
| – |
Lid will not open after cooking; float valve appears stuck in the up position even after cooling.
|
Stuck Float Valve / Residual Pressure | View Details |
| – |
Liquid leaking from the bottom of the multicooker onto the countertop.
|
Internal Leak / Condensate Drain Issue | View Details |
| – |
Multicooker does not power on at all; no lights or display when plugged in.
|
No Power / Dead Appliance | View Details |
| – |
Multicooker heats but never reaches pressure; steam constantly escapes from the lid.
|
Pressure Leakage / Inability to Seal | View Details |
| – |
Multicooker makes loud clicking, popping, or metallic noises during heating.
|
Thermal Expansion / Pot and Heater Noise | View Details |
| – |
Multicooker powers on but will not start any program; pressing Start does nothing.
|
Start Circuit / Safety Interlock Not Engaged | View Details |
| – |
Multicooker vibrates excessively or moves slightly on the countertop during operation.
|
Mechanical Vibration / Imbalance | View Details |
| – |
Programs end too early or switch to Keep Warm before food is cooked.
|
Premature Program Termination | View Details |
| – |
Rust spots appearing on the inner pot or inside the cooking chamber.
|
Corrosion / Coating Damage | View Details |
| – |
Strong unpleasant odor from inside the multicooker even after cleaning.
|
Odor Retention / Bacterial Growth | View Details |
| – |
Visible mold or residue in hard-to-reach areas of the lid or around the gasket.
|
Microbial Contamination / Poor Cleaning Access | View Details |
| – |
Water or condensation leaking from around the lid edge during cooking.
|
Lid Perimeter Leak | View Details |
No matching codes found
Advertisements