E15
Electrolux
Firmware / Program Memory Error
E15 is displayed and the cooker may not respond; sometimes occurs after a power outage during cooking.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Corrupted firmware due to power interruption, Failed EEPROM or flash memory on PCB, Incomplete factory reset, Power surge damage
How to Fix / Troubleshooting
Safety first: Unplug the unit before attempting resets.
- Extended power reset: Unplug the cooker for at least 30 minutes to fully discharge internal circuits. Plug back in and test.
- Factory reset: Follow the Electrolux manual for performing a factory reset (often holding specific keys at power-on). This may clear corrupted settings.
- Use surge protection: Connect the cooker through a quality surge protector to prevent future memory corruption.
- If E15 persists after reset, the main control PCB firmware or memory is likely damaged. Replacement of the board is typically required; firmware re-flashing is usually only available at authorized service centers.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Main Control PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements