Emeril Lagasse
Short Circuit / Ground Fault
Unit trips the household circuit breaker or GFCI when plugged in or when heating starts.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted heating element, Moisture inside base, Damaged power cord, Shorted main control board
How to Fix / Troubleshooting
Safety first: Do not repeatedly reset a breaker that trips; this indicates a potentially dangerous fault.
- Dry the unit: If liquid was spilled into the base, unplug immediately and allow the cooker to dry for at least 48 hours in a warm, dry place.
- Inspect cord: Check the power cord for cuts or crushed sections. Replace if damaged.
- Try different outlet: Test on a non-GFCI outlet to see if only GFCI trips (still a concern, but helps diagnosis).
- Service: If the breaker trips instantly when heating starts, the heating element or control board is likely shorted and must be replaced by a professional.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Main Heating Element
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements