Emeril Lagasse
Emeril Lagasse Multicookers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Multicooker will not start a cooking cycle and displays E1 on the control panel.
Lid Not Detected / Lid Switch Fault
E2
Multicooker beeps and shows E2 shortly after starting a cooking program; heating stops.
Bottom Temperature Sensor (NTC) Fault
E3
E3 error appears during preheat or pressure build; cooker stops heating.
Overheat Protection / High Temperature Error
E4
E4 error appears and cooker will not start or stops mid-cycle.
Overpressure / Pressure Sensor Fault
E5
E5 error code appears and the cooker will not build pressure or complete the cycle.
Pressure Not Reached / Low Pressure Detection
E6
E6 error appears immediately when trying to start any program; no heating occurs.
Heating Element / Triac Drive Fault
E7
E7 error appears during operation; cooker may shut down unexpectedly.
Upper Lid Temperature Sensor Fault
E8
E8 error code appears and the cooker will not start pressure programs.
Pressure Switch / Lid Lock Interlock Error
E9
E9 error appears randomly during cooking; unit may beep and stop heating.
Internal Communication / Control Board Error
Err
Generic “Err” or “Error” message appears on display; cooker beeps and stops.
General Control System Error
HOT
Display shows “HOT” and cooker stops or will not start a new program.
Overheat / High Temperature Warning (Non-fatal)
LID
Display shows a lid-related message (e.g., “LID”, “LID OPEN”) and cooker will not start.
Lid Open Detection
noP
Display shows “noP” or similar; cooker fails to build or maintain pressure.
No Pressure Detected
OvHt
Display shows “OvHt” or similar overheat message; cooker shuts down.
Severe Overheat Protection Triggered
Symptom
Beeping alarm sounds continuously or randomly without any error code.
Buzzer / Alarm Circuit Malfunction
Symptom
Display and lights flicker or reset during cooking.
Intermittent Power / Loose Connection
Symptom
Display segments are missing or unreadable; some numbers or letters do not show correctly.
LED/LCD Display Failure
Symptom
Display works but heating never starts; no warmth on the bottom plate.
Open Heating Circuit
Symptom
Float valve does not rise; cooker never indicates it is at pressure.
Float Valve Stuck / Seal Failure
Symptom
Inner pot coating is peeling or scratched; food sticks badly.
Nonstick Coating Degradation
Symptom
Inner pot is difficult to remove; seems stuck to the heating plate after cooking.
Vacuum Lock / Thermal Expansion Sticking
Symptom
Keep Warm function overheats food, causing burning or drying out.
Incorrect Temperature Regulation on Keep Warm
Symptom
Lid is very difficult to open after cooking, even after pressure is released.
Lid Binding / Residual Pressure
Symptom
Lid will not close or lock properly; locking handle feels obstructed.
Lid Lock Obstruction / Misalignment
Symptom
Liquid or foam spurts out of the steam release valve when pressure is released.
Foaming / Overfilled Pot
Symptom
Multicooker does not power on at all; no lights or display when plugged in.
No Power / Dead Unit
Symptom
Multicooker makes loud clicking or popping noises during heating.
Thermal Expansion / Relay Operation Noise
Symptom
Multicooker powers on but will not start any program; Start button unresponsive.
User Interface / Keypad Failure
Symptom
Slow Cook or Sauté modes do not get hot enough; food barely simmers or browns.
Underheating / Weak Heating Element
Symptom
Steam or liquid sprays from the steam release valve continuously during pressure cooking.
Steam Release Valve Malfunction
Symptom
Timer counts down but food remains undercooked; pressure seems low.
Insufficient Pressure / Early Pressure Loss
Symptom
Unit heats but never reaches pressure; steam constantly escapes from the lid area.
Lid Seal Leak / Gasket Failure
Symptom
Unit trips the household circuit breaker or GFCI when plugged in or when heating starts.
Short Circuit / Ground Fault
Symptom
Unusual burning smell during cooking, even when food is not burnt.
Overheating or Electrical Insulation Odor
Symptom
Water or condensation drips from the sides of the lid or down the exterior during cooking.
Condensation Management / Collector Overflow
Symptom
Water or steam leaks from around the float valve during cooking.
Float Valve Seal Leak
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Multicooker will not start a cooking cycle and displays E1 on the control panel.
|
Lid Not Detected / Lid Switch Fault | View Details |
| E2 |
Multicooker beeps and shows E2 shortly after starting a cooking program; heating stops.
|
Bottom Temperature Sensor (NTC) Fault | View Details |
| E3 |
E3 error appears during preheat or pressure build; cooker stops heating.
|
Overheat Protection / High Temperature Error | View Details |
| E4 |
E4 error appears and cooker will not start or stops mid-cycle.
|
Overpressure / Pressure Sensor Fault | View Details |
| E5 |
E5 error code appears and the cooker will not build pressure or complete the cycle.
|
Pressure Not Reached / Low Pressure Detection | View Details |
| E6 |
E6 error appears immediately when trying to start any program; no heating occurs.
|
Heating Element / Triac Drive Fault | View Details |
| E7 |
E7 error appears during operation; cooker may shut down unexpectedly.
|
Upper Lid Temperature Sensor Fault | View Details |
| E8 |
E8 error code appears and the cooker will not start pressure programs.
|
Pressure Switch / Lid Lock Interlock Error | View Details |
| E9 |
E9 error appears randomly during cooking; unit may beep and stop heating.
|
Internal Communication / Control Board Error | View Details |
| Err |
Generic “Err” or “Error” message appears on display; cooker beeps and stops.
|
General Control System Error | View Details |
| HOT |
Display shows “HOT” and cooker stops or will not start a new program.
|
Overheat / High Temperature Warning (Non-fatal) | View Details |
| LID |
Display shows a lid-related message (e.g., “LID”, “LID OPEN”) and cooker will not start.
|
Lid Open Detection | View Details |
| noP |
Display shows “noP” or similar; cooker fails to build or maintain pressure.
|
No Pressure Detected | View Details |
| OvHt |
Display shows “OvHt” or similar overheat message; cooker shuts down.
|
Severe Overheat Protection Triggered | View Details |
| – |
Beeping alarm sounds continuously or randomly without any error code.
|
Buzzer / Alarm Circuit Malfunction | View Details |
| – |
Display and lights flicker or reset during cooking.
|
Intermittent Power / Loose Connection | View Details |
| – |
Display segments are missing or unreadable; some numbers or letters do not show correctly.
|
LED/LCD Display Failure | View Details |
| – |
Display works but heating never starts; no warmth on the bottom plate.
|
Open Heating Circuit | View Details |
| – |
Float valve does not rise; cooker never indicates it is at pressure.
|
Float Valve Stuck / Seal Failure | View Details |
| – |
Inner pot coating is peeling or scratched; food sticks badly.
|
Nonstick Coating Degradation | View Details |
| – |
Inner pot is difficult to remove; seems stuck to the heating plate after cooking.
|
Vacuum Lock / Thermal Expansion Sticking | View Details |
| – |
Keep Warm function overheats food, causing burning or drying out.
|
Incorrect Temperature Regulation on Keep Warm | View Details |
| – |
Lid is very difficult to open after cooking, even after pressure is released.
|
Lid Binding / Residual Pressure | View Details |
| – |
Lid will not close or lock properly; locking handle feels obstructed.
|
Lid Lock Obstruction / Misalignment | View Details |
| – |
Liquid or foam spurts out of the steam release valve when pressure is released.
|
Foaming / Overfilled Pot | View Details |
| – |
Multicooker does not power on at all; no lights or display when plugged in.
|
No Power / Dead Unit | View Details |
| – |
Multicooker makes loud clicking or popping noises during heating.
|
Thermal Expansion / Relay Operation Noise | View Details |
| – |
Multicooker powers on but will not start any program; Start button unresponsive.
|
User Interface / Keypad Failure | View Details |
| – |
Slow Cook or Sauté modes do not get hot enough; food barely simmers or browns.
|
Underheating / Weak Heating Element | View Details |
| – |
Steam or liquid sprays from the steam release valve continuously during pressure cooking.
|
Steam Release Valve Malfunction | View Details |
| – |
Timer counts down but food remains undercooked; pressure seems low.
|
Insufficient Pressure / Early Pressure Loss | View Details |
| – |
Unit heats but never reaches pressure; steam constantly escapes from the lid area.
|
Lid Seal Leak / Gasket Failure | View Details |
| – |
Unit trips the household circuit breaker or GFCI when plugged in or when heating starts.
|
Short Circuit / Ground Fault | View Details |
| – |
Unusual burning smell during cooking, even when food is not burnt.
|
Overheating or Electrical Insulation Odor | View Details |
| – |
Water or condensation drips from the sides of the lid or down the exterior during cooking.
|
Condensation Management / Collector Overflow | View Details |
| – |
Water or steam leaks from around the float valve during cooking.
|
Float Valve Seal Leak | View Details |
No matching codes found
Advertisements