Multicooker does not power on at all; no lights or display when plugged in.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Do not attempt to open the cooker housing unless you are qualified; there are live mains components inside.
- Check outlet: Plug a lamp or phone charger into the same outlet to confirm it has power. Reset any tripped breakers or GFCI outlets.
- Try another outlet: Plug the cooker directly into a different known-good wall outlet (no extension cords or power strips).
- Inspect power cord: Look for cuts, kinks, or burn marks. If the cord is damaged, do not use the appliance.
- Check plug fit: Ensure the plug is fully inserted and not loose in the socket.
If the unit remains completely dead with a good outlet and intact cord, an internal fuse or the control board power supply has likely failed and requires professional service.