Oursson
Display Module or Backlight Failure
Display is dim, flickering, or some segments/LEDs do not light.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging LED backlight, Loose display connector, Cracked display PCB, Faulty display driver on main board
How to Fix / Troubleshooting
Safety first: Unplug the cooker before opening the control panel area.
- Check viewing angle: Some LCDs appear dim at extreme angles; verify from straight on.
- Inspect connections (advanced): Remove the control panel cover and check the ribbon cable between the display and main PCB. Reseat the connector.
- Look for damage: Inspect the display board for cracks or corrosion. If damaged, replace the display module.
- Board-level fault: If the display remains dim or partially lit after reseating, the backlight or driver circuit may be failing and requires professional repair.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Display Module / Control Panel PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements