Vorwerk
Moisture Ingress / Condensation
Condensation or water droplets visible inside the base or around vents
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Spillage during cleaning, Overboiling and overflow, Using appliance under cold conditions causing condensation, Damaged bowl seal allowing leaks
How to Fix / Troubleshooting
Safety first: Immediately unplug the appliance. Do not operate it while moisture is present inside the base.
- 1. Dry externally: Wipe all visible moisture from the exterior and around vents.
- 2. Air dry: Place the appliance in a warm, dry room for at least 24–48 hours to allow internal moisture to evaporate. Do not use hairdryers or heaters directly on the unit.
- 3. Check for leaks: Inspect the bowl and lid seals for leaks that may have caused the ingress.
- 4. Test carefully: After thorough drying, reconnect and test with a small amount of water. If any error codes or unusual behavior occur, stop using it.
- 5. Service if needed: Persistent issues may indicate corrosion or damage to the power board or sensors.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Mixing bowl seal set
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements