F95
Dacor
Cooling system over-temperature or fan speed fault
Oven displays F95 and may shut down during high-temperature operation or self-clean.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed cooling fan motor, Blocked cooling air passages, Faulty fan speed sensor (if equipped), Control board not driving fan correctly
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker and allow the oven to cool fully before inspection.
- Check vents: Ensure that all front and rear vents are clear and that the oven has proper clearance in the cabinet.
- Verify fan operation: During a bake cycle, listen for the cooling fan. If it does not run or is very noisy, inspect the fan motor and blades.
- Clean fan area: Remove dust and grease buildup from the fan and surrounding area to improve airflow.
- Test fan motor: With power off, test the motor for continuity and free rotation. Replace if seized or open.
- Control board: If the fan is good but not being energized, the control board may be faulty and require replacement.
Warning: Operating without proper cooling can damage electronics and pose a fire risk.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements