Dacor Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F0
Dacor oven displays F0 and may beep continuously; oven may not start or may shut off unexpectedly.
Stuck or shorted oven keypad
F1
Oven displays F1 and may beep; oven may not respond to keypad inputs or may shut off.
Electronic oven control failure or runaway temperature detection
F10
Dacor oven shows F10 and may shut off heating; often associated with runaway temperature conditions.
Runaway temperature / sensor out-of-range
F11
Oven displays F11 and may beep continuously; keypad may seem to press itself.
Keypad short / stuck key detected
F12
Dacor oven shows F12 and may not start; display may be blank or partially lit.
Communication or configuration error between display and main control
F13
Oven displays F13 and may not heat or may shut down during use.
High temperature limit or thermal fuse fault
F2
Dacor oven shows F2 and may shut off heating; often occurs during or after a high-temperature bake or broil.
Oven over-temperature condition
F3
Oven displays F3 and will not heat or stops mid-cycle.
Open or shorted oven temperature sensor circuit
F30
Dacor oven shows F30 and will not heat or temperature is not controlled.
Open oven temperature sensor circuit (specific variant)
F31
Oven displays F31 and will not heat correctly.
Shorted oven temperature sensor circuit (specific variant)
F34
Dacor oven shows F34 and may not start or may shut down during convection modes.
Convection fan or convection sensor fault (model-dependent)
F4
Dacor oven shows F4 and will not start or maintain temperature.
Shorted oven temperature sensor circuit
F5
Oven displays F5 and may not respond to commands or may shut off unexpectedly.
Control board relay or watchdog failure
F6
Dacor oven shows F6 and may not heat or may behave erratically.
Communication error between user interface and control board
F7
Oven displays F7 and may beep; keypad may not respond correctly.
Keypad short or stuck key error
F8
Dacor oven shows F8 and may not heat or may shut down during use.
Cooling fan or airflow fault
F9
Oven displays F9 and the door may remain locked or unlocked incorrectly; self-clean may not start or complete.
Door lock mechanism fault
F90
Oven displays F90 and the door may not lock or unlock properly, especially around self-clean cycles.
Door lock motor or switch failure (variant code)
F91
Dacor oven shows F91 and self-clean will not start or complete; door may not lock.
Door lock not engaging during self-clean
F92
Oven displays F92 and the door may remain locked after self-clean or may not unlock at all.
Door lock not unlocking after cycle
F93
Dacor oven shows F93 and may not start a cycle; door lock system error.
Door lock circuit fault (general)
F95
Oven displays F95 and may shut down during high-temperature operation or self-clean.
Cooling system over-temperature or fan speed fault
Symptom
Control panel is completely dead; no display, no response to buttons.
No power to control / control board failure
Symptom
Digital display is dim, flickering, or some segments are missing.
Display module or power supply degradation
Symptom
Display works but oven will not start; pressing Start does nothing or cancels immediately.
Control logic or door switch interlock issue
Symptom
Gas Dacor oven will not ignite in bake mode; you may hear clicking but no flame, or no clicking at all.
Bake ignition system failure (gas)
Symptom
Oven door glass is cracked, shattered, or fogged between panes.
Door glass assembly failure
Symptom
Oven door will not close fully or pops open slightly during operation.
Door hinge or latch misalignment
Symptom
Oven door will not open after self-clean cycle; no error code displayed.
Door lock stuck in locked position
Symptom
Oven emits a burning plastic or electrical smell during use.
Overheating wiring or new component off-gassing
Symptom
Oven heats but does not reach set temperature or takes excessively long to preheat.
Temperature regulation / calibration issue
Symptom
Oven interior light stays on all the time, even when the door is closed and light button is off.
Stuck light relay or door switch fault
Symptom
Oven light does not turn on when the door is opened or when the light button is pressed.
Oven cavity lighting failure
Symptom
Oven makes loud banging, rattling, or grinding noises during operation.
Mechanical noise from fan, panels, or loose components
Symptom
Oven produces excessive smoke during normal baking (not self-clean).
Combustion of food residue or oil on elements and cavity surfaces
Symptom
Oven shuts off by itself during cooking and may restart after cooling.
Overheating of control area or intermittent power loss
Symptom
Oven temperature fluctuates widely or cooks unevenly; hot spots or undercooked areas.
Uneven heating / airflow problem
Symptom
Oven will not heat at all in bake mode (electric Dacor oven); broil may or may not work.
Bake element circuit failure
Symptom
Oven will not heat in broil mode; bake may still work normally.
Broil element circuit failure
Symptom
Self-clean cycle will not start; oven beeps or displays a message but no error code.
Self-clean interlock or configuration issue
Symptom
Strong gas smell when attempting to use gas oven or during operation.
Gas leak or incomplete ignition
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F0 |
Dacor oven displays F0 and may beep continuously; oven may not start or may shut off unexpectedly.
|
Stuck or shorted oven keypad | View Details |
| F1 |
Oven displays F1 and may beep; oven may not respond to keypad inputs or may shut off.
|
Electronic oven control failure or runaway temperature detection | View Details |
| F10 |
Dacor oven shows F10 and may shut off heating; often associated with runaway temperature conditions.
|
Runaway temperature / sensor out-of-range | View Details |
| F11 |
Oven displays F11 and may beep continuously; keypad may seem to press itself.
|
Keypad short / stuck key detected | View Details |
| F12 |
Dacor oven shows F12 and may not start; display may be blank or partially lit.
|
Communication or configuration error between display and main control | View Details |
| F13 |
Oven displays F13 and may not heat or may shut down during use.
|
High temperature limit or thermal fuse fault | View Details |
| F2 |
Dacor oven shows F2 and may shut off heating; often occurs during or after a high-temperature bake or broil.
|
Oven over-temperature condition | View Details |
| F3 |
Oven displays F3 and will not heat or stops mid-cycle.
|
Open or shorted oven temperature sensor circuit | View Details |
| F30 |
Dacor oven shows F30 and will not heat or temperature is not controlled.
|
Open oven temperature sensor circuit (specific variant) | View Details |
| F31 |
Oven displays F31 and will not heat correctly.
|
Shorted oven temperature sensor circuit (specific variant) | View Details |
| F34 |
Dacor oven shows F34 and may not start or may shut down during convection modes.
|
Convection fan or convection sensor fault (model-dependent) | View Details |
| F4 |
Dacor oven shows F4 and will not start or maintain temperature.
|
Shorted oven temperature sensor circuit | View Details |
| F5 |
Oven displays F5 and may not respond to commands or may shut off unexpectedly.
|
Control board relay or watchdog failure | View Details |
| F6 |
Dacor oven shows F6 and may not heat or may behave erratically.
|
Communication error between user interface and control board | View Details |
| F7 |
Oven displays F7 and may beep; keypad may not respond correctly.
|
Keypad short or stuck key error | View Details |
| F8 |
Dacor oven shows F8 and may not heat or may shut down during use.
|
Cooling fan or airflow fault | View Details |
| F9 |
Oven displays F9 and the door may remain locked or unlocked incorrectly; self-clean may not start or complete.
|
Door lock mechanism fault | View Details |
| F90 |
Oven displays F90 and the door may not lock or unlock properly, especially around self-clean cycles.
|
Door lock motor or switch failure (variant code) | View Details |
| F91 |
Dacor oven shows F91 and self-clean will not start or complete; door may not lock.
|
Door lock not engaging during self-clean | View Details |
| F92 |
Oven displays F92 and the door may remain locked after self-clean or may not unlock at all.
|
Door lock not unlocking after cycle | View Details |
| F93 |
Dacor oven shows F93 and may not start a cycle; door lock system error.
|
Door lock circuit fault (general) | View Details |
| F95 |
Oven displays F95 and may shut down during high-temperature operation or self-clean.
|
Cooling system over-temperature or fan speed fault | View Details |
| – |
Control panel is completely dead; no display, no response to buttons.
|
No power to control / control board failure | View Details |
| – |
Digital display is dim, flickering, or some segments are missing.
|
Display module or power supply degradation | View Details |
| – |
Display works but oven will not start; pressing Start does nothing or cancels immediately.
|
Control logic or door switch interlock issue | View Details |
| – |
Gas Dacor oven will not ignite in bake mode; you may hear clicking but no flame, or no clicking at all.
|
Bake ignition system failure (gas) | View Details |
| – |
Oven door glass is cracked, shattered, or fogged between panes.
|
Door glass assembly failure | View Details |
| – |
Oven door will not close fully or pops open slightly during operation.
|
Door hinge or latch misalignment | View Details |
| – |
Oven door will not open after self-clean cycle; no error code displayed.
|
Door lock stuck in locked position | View Details |
| – |
Oven emits a burning plastic or electrical smell during use.
|
Overheating wiring or new component off-gassing | View Details |
| – |
Oven heats but does not reach set temperature or takes excessively long to preheat.
|
Temperature regulation / calibration issue | View Details |
| – |
Oven interior light stays on all the time, even when the door is closed and light button is off.
|
Stuck light relay or door switch fault | View Details |
| – |
Oven light does not turn on when the door is opened or when the light button is pressed.
|
Oven cavity lighting failure | View Details |
| – |
Oven makes loud banging, rattling, or grinding noises during operation.
|
Mechanical noise from fan, panels, or loose components | View Details |
| – |
Oven produces excessive smoke during normal baking (not self-clean).
|
Combustion of food residue or oil on elements and cavity surfaces | View Details |
| – |
Oven shuts off by itself during cooking and may restart after cooling.
|
Overheating of control area or intermittent power loss | View Details |
| – |
Oven temperature fluctuates widely or cooks unevenly; hot spots or undercooked areas.
|
Uneven heating / airflow problem | View Details |
| – |
Oven will not heat at all in bake mode (electric Dacor oven); broil may or may not work.
|
Bake element circuit failure | View Details |
| – |
Oven will not heat in broil mode; bake may still work normally.
|
Broil element circuit failure | View Details |
| – |
Self-clean cycle will not start; oven beeps or displays a message but no error code.
|
Self-clean interlock or configuration issue | View Details |
| – |
Strong gas smell when attempting to use gas oven or during operation.
|
Gas leak or incomplete ignition | View Details |
No matching codes found
Advertisements