Frigidaire
Insufficient cooling / heat migration to control area
Control panel or knobs become extremely hot to the touch during baking.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed cooling fan (on models with control cooling), Blocked oven vents, Damaged or missing insulation around oven cavity, Door not sealing properly
How to Fix / Troubleshooting
Safety First: If plastic parts are melting or there is a burning smell, turn off the oven and breaker immediately.
- Check vents: Ensure the front and rear oven vents are not blocked by foil, pans, or cabinetry.
- Cooling fan: On models with a control cooling fan, listen for the fan during and after baking. If it does not run, test and replace the cooling fan motor.
- Door seal: Inspect the door gasket for gaps that could allow excessive heat to escape toward the controls. Replace if damaged.
- Insulation: If the problem persists, internal insulation may be displaced or missing; this typically requires a professional to inspect and repair.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements