Frigidaire Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Oven displays E0 or E0-F0 type code; may indicate no error or a cleared fault depending on model.
No active fault / placeholder code
E1
Oven displays E1; may be accompanied by beeping and disabled functions.
Electronic control failure or configuration error
E2
Oven displays E2; may relate to temperature sensing or over-temperature.
Oven temperature sensor or over-temperature fault
F1
Oven beeps continuously and displays F1; may occur shortly after power-up or randomly during use.
Electronic Oven Control (EOC) keypad or internal control failure
F10
Oven displays F10 and may overheat or shut down; often described as 'runaway temperature'.
Runaway oven temperature detected
F11
Oven displays F11 and emits a constant or intermittent beeping; keypad may seem stuck.
Shorted keypad or stuck key error
F12
Oven displays F12; may not respond to commands.
Electronic oven control internal fault
F13
Oven displays F13; often associated with keypad or control communication issues.
Keypad/EOC communication failure
F14
Oven displays F14; may not allow normal operation.
EEPROM or configuration error in control board
F15
Oven displays F15; may be related to self-clean or door lock operation.
Door lock motor or switch fault
F2
Oven displays F2 and may beep; oven may overheat or shut down during a bake or broil cycle.
Oven temperature runaway / high temperature fault
F3
Oven displays F3 and beeps; oven may not heat or may shut off shortly after starting.
Open or shorted oven temperature sensor circuit
F30
Oven displays F30; oven may not heat correctly or may shut off.
Open oven temperature sensor circuit
F31
Oven displays F31; may occur intermittently with temperature swings.
Shorted oven temperature sensor circuit
F4
Oven displays F4; may occur intermittently during preheat or while cooling down.
Shorted oven temperature sensor circuit
F5
Oven displays F5 and may not respond to keypad inputs.
Control board or relay board failure
F6
Oven displays F6; may be accompanied by unresponsive or erratic keypad behavior.
Keypad/clock communication error
F7
Oven displays F7; may beep continuously and prevent normal operation.
Stuck or shorted keypad key
F8
Oven displays F8; may be associated with cooling fan or relay issues.
Control board relay or cooling fan circuit fault
F9
Oven displays F9 or F9-0; door may not lock/unlock during self-clean, or oven may not start self-clean.
Oven door lock circuit failure
F90
Oven displays F90; door may remain locked or unlocked and self-clean may not work.
Door lock motor not operating or not reaching position
F91
Oven displays F91; door may not lock during self-clean.
Door lock motor will not lock
F92
Oven displays F92; door may not unlock after self-clean.
Door lock motor will not unlock
F93
Oven displays F93; self-clean may not start or complete.
Door lock motor taking too long to lock
F94
Oven displays F94; self-clean may abort and door may remain locked.
Door lock motor taking too long to unlock
F95
Oven displays F95; door lock system error.
Door lock motor or switch general fault
Symptom
Bake element does not glow red and bottom of oven does not heat, but broil may still work.
Open bake element circuit
Symptom
Broil element does not heat; bake works normally.
Open broil element circuit
Symptom
Control panel or knobs become extremely hot to the touch during baking.
Insufficient cooling / heat migration to control area
Symptom
Convection fan does not run in convection bake/roast modes; oven still heats but unevenly.
Convection fan motor failure
Symptom
Oven clock loses time or resets intermittently, but cooking functions mostly work.
Unstable control power or failing clock circuit
Symptom
Oven display and clock are dead; no lights or response, but cooktop burners may still work (on range models).
No power to control / dead control board
Symptom
Oven display shows correct temperature but food cooks unevenly (hot spots and cold spots).
Uneven heat distribution
Symptom
Oven display works but buttons do not respond or respond intermittently.
Unresponsive or intermittent touchpad
Symptom
Oven door will not close fully or appears misaligned; heat escapes around the door.
Door alignment / hinge or gasket failure
Symptom
Oven door will not lock to start self-clean; self-clean cycle will not begin.
Door lock will not engage
Symptom
Oven door will not open after self-clean cycle; no error code displayed.
Door lock stuck in locked position
Symptom
Oven emits a strong chemical or paint-like odor on first few uses.
Normal burn-in of manufacturing residues
Symptom
Oven glass door is fogging up excessively or condensation forms between glass panes.
Door glass seal or venting issue
Symptom
Oven heats but does not reach set temperature or takes excessively long to preheat.
Insufficient heating / temperature calibration issue
Symptom
Oven interior light stays on all the time and will not turn off even when door is closed.
Stuck light circuit or door switch
Symptom
Oven light will not turn on, but oven heats normally.
Oven cavity light circuit failure
Symptom
Oven makes loud banging, popping, or booming noises during heating or cooling.
Thermal expansion noise / mechanical stress
Symptom
Oven produces a strong burning smell or smoke during normal baking (not first use or self-clean).
Contamination burning off / overheating of residues
Symptom
Oven takes an unusually long time to cool down and the cooling fan runs for a very long time after use.
Extended cooling / residual heat retention
Symptom
Oven temperature is too hot or burns food even when set correctly.
Overheating / inaccurate temperature control
Symptom
Oven trips the house breaker or GFCI when turned on or during heating.
Electrical short or ground fault
Symptom
Oven will not heat at all on bake or broil; display and lights work but elements stay cold.
No heat due to open heating circuit
Symptom
Self-clean cycle does not start or stops early without an error code.
Self-clean cycle aborted
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Oven displays E0 or E0-F0 type code; may indicate no error or a cleared fault depending on model.
|
No active fault / placeholder code | View Details |
| E1 |
Oven displays E1; may be accompanied by beeping and disabled functions.
|
Electronic control failure or configuration error | View Details |
| E2 |
Oven displays E2; may relate to temperature sensing or over-temperature.
|
Oven temperature sensor or over-temperature fault | View Details |
| F1 |
Oven beeps continuously and displays F1; may occur shortly after power-up or randomly during use.
|
Electronic Oven Control (EOC) keypad or internal control failure | View Details |
| F10 |
Oven displays F10 and may overheat or shut down; often described as 'runaway temperature'.
|
Runaway oven temperature detected | View Details |
| F11 |
Oven displays F11 and emits a constant or intermittent beeping; keypad may seem stuck.
|
Shorted keypad or stuck key error | View Details |
| F12 |
Oven displays F12; may not respond to commands.
|
Electronic oven control internal fault | View Details |
| F13 |
Oven displays F13; often associated with keypad or control communication issues.
|
Keypad/EOC communication failure | View Details |
| F14 |
Oven displays F14; may not allow normal operation.
|
EEPROM or configuration error in control board | View Details |
| F15 |
Oven displays F15; may be related to self-clean or door lock operation.
|
Door lock motor or switch fault | View Details |
| F2 |
Oven displays F2 and may beep; oven may overheat or shut down during a bake or broil cycle.
|
Oven temperature runaway / high temperature fault | View Details |
| F3 |
Oven displays F3 and beeps; oven may not heat or may shut off shortly after starting.
|
Open or shorted oven temperature sensor circuit | View Details |
| F30 |
Oven displays F30; oven may not heat correctly or may shut off.
|
Open oven temperature sensor circuit | View Details |
| F31 |
Oven displays F31; may occur intermittently with temperature swings.
|
Shorted oven temperature sensor circuit | View Details |
| F4 |
Oven displays F4; may occur intermittently during preheat or while cooling down.
|
Shorted oven temperature sensor circuit | View Details |
| F5 |
Oven displays F5 and may not respond to keypad inputs.
|
Control board or relay board failure | View Details |
| F6 |
Oven displays F6; may be accompanied by unresponsive or erratic keypad behavior.
|
Keypad/clock communication error | View Details |
| F7 |
Oven displays F7; may beep continuously and prevent normal operation.
|
Stuck or shorted keypad key | View Details |
| F8 |
Oven displays F8; may be associated with cooling fan or relay issues.
|
Control board relay or cooling fan circuit fault | View Details |
| F9 |
Oven displays F9 or F9-0; door may not lock/unlock during self-clean, or oven may not start self-clean.
|
Oven door lock circuit failure | View Details |
| F90 |
Oven displays F90; door may remain locked or unlocked and self-clean may not work.
|
Door lock motor not operating or not reaching position | View Details |
| F91 |
Oven displays F91; door may not lock during self-clean.
|
Door lock motor will not lock | View Details |
| F92 |
Oven displays F92; door may not unlock after self-clean.
|
Door lock motor will not unlock | View Details |
| F93 |
Oven displays F93; self-clean may not start or complete.
|
Door lock motor taking too long to lock | View Details |
| F94 |
Oven displays F94; self-clean may abort and door may remain locked.
|
Door lock motor taking too long to unlock | View Details |
| F95 |
Oven displays F95; door lock system error.
|
Door lock motor or switch general fault | View Details |
| – |
Bake element does not glow red and bottom of oven does not heat, but broil may still work.
|
Open bake element circuit | View Details |
| – |
Broil element does not heat; bake works normally.
|
Open broil element circuit | View Details |
| – |
Control panel or knobs become extremely hot to the touch during baking.
|
Insufficient cooling / heat migration to control area | View Details |
| – |
Convection fan does not run in convection bake/roast modes; oven still heats but unevenly.
|
Convection fan motor failure | View Details |
| – |
Oven clock loses time or resets intermittently, but cooking functions mostly work.
|
Unstable control power or failing clock circuit | View Details |
| – |
Oven display and clock are dead; no lights or response, but cooktop burners may still work (on range models).
|
No power to control / dead control board | View Details |
| – |
Oven display shows correct temperature but food cooks unevenly (hot spots and cold spots).
|
Uneven heat distribution | View Details |
| – |
Oven display works but buttons do not respond or respond intermittently.
|
Unresponsive or intermittent touchpad | View Details |
| – |
Oven door will not close fully or appears misaligned; heat escapes around the door.
|
Door alignment / hinge or gasket failure | View Details |
| – |
Oven door will not lock to start self-clean; self-clean cycle will not begin.
|
Door lock will not engage | View Details |
| – |
Oven door will not open after self-clean cycle; no error code displayed.
|
Door lock stuck in locked position | View Details |
| – |
Oven emits a strong chemical or paint-like odor on first few uses.
|
Normal burn-in of manufacturing residues | View Details |
| – |
Oven glass door is fogging up excessively or condensation forms between glass panes.
|
Door glass seal or venting issue | View Details |
| – |
Oven heats but does not reach set temperature or takes excessively long to preheat.
|
Insufficient heating / temperature calibration issue | View Details |
| – |
Oven interior light stays on all the time and will not turn off even when door is closed.
|
Stuck light circuit or door switch | View Details |
| – |
Oven light will not turn on, but oven heats normally.
|
Oven cavity light circuit failure | View Details |
| – |
Oven makes loud banging, popping, or booming noises during heating or cooling.
|
Thermal expansion noise / mechanical stress | View Details |
| – |
Oven produces a strong burning smell or smoke during normal baking (not first use or self-clean).
|
Contamination burning off / overheating of residues | View Details |
| – |
Oven takes an unusually long time to cool down and the cooling fan runs for a very long time after use.
|
Extended cooling / residual heat retention | View Details |
| – |
Oven temperature is too hot or burns food even when set correctly.
|
Overheating / inaccurate temperature control | View Details |
| – |
Oven trips the house breaker or GFCI when turned on or during heating.
|
Electrical short or ground fault | View Details |
| – |
Oven will not heat at all on bake or broil; display and lights work but elements stay cold.
|
No heat due to open heating circuit | View Details |
| – |
Self-clean cycle does not start or stops early without an error code.
|
Self-clean cycle aborted | View Details |
No matching codes found
Advertisements