Frigidaire
Door alignment / hinge or gasket failure
Oven door will not close fully or appears misaligned; heat escapes around the door.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Bent or worn door hinges, Loose hinge receiver brackets, Deformed oven door, Compressed or damaged door gasket
How to Fix / Troubleshooting
Safety First: Ensure the oven is cool before working on the door.
- Inspect hinges: Open the door and check hinges for bending, cracks, or looseness at the frame. Tighten mounting screws if loose.
- Check hinge receivers: Inspect the hinge receivers in the oven frame for damage or misalignment. Replace if cracked or bent.
- Door removal: Many Frigidaire doors can be removed by opening to the broil stop position and lifting off the hinges. Remove the door to inspect and replace hinges if needed.
- Gasket inspection: Check the door gasket for flat spots, tears, or missing sections. Replace the oven door gasket if it does not seal evenly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinge
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements