Frigidaire
Door lock will not engage
Oven door will not lock to start self-clean; self-clean cycle will not begin.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed door lock motor, Misaligned door or latch, Faulty lock position switch, Control not sending lock signal
How to Fix / Troubleshooting
Safety First: Ensure the oven is cool before troubleshooting the lock.
- Check door closure: Confirm the door closes fully and the latch engages the frame. Adjust racks or remove obstructions.
- Listen for lock motor: Start a self-clean cycle and listen for the lock motor. If silent, suspect the motor or control.
- Inspect lock assembly: Access the lock motor and linkage from the top or rear. Check for binding or broken parts.
- Test motor and switches: With power off, test the lock motor and switches with a multimeter. Replace the door lock assembly if defective.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Door Lock Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements