Fulgor Milano
Single Mode Heating Failure
Oven light works but elements do not heat in one specific mode (e.g., grill only, convection only).
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed specific heating element (grill, bottom, or ring), Mode selector logic fault on control board, Broken wire to that element, Faulty temperature limiter in that circuit
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before accessing rear panels or elements.
- 1. Identify failing mode: Test each cooking mode individually and note which one does not heat.
- 2. Test associated element: For the failing mode, locate the corresponding element (e.g., top grill element for broil). Remove one wire and measure resistance. Replace if open.
- 3. Inspect wiring: Trace the wiring from the element back to the control board. Repair any burnt or broken wires and ensure connectors are tight.
- 4. Check limiters: Some modes use additional thermostats or limiters. Test these for continuity and replace if open.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Grill / Broil Element
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements