Fulgor Milano Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
Oven will not heat in any mode; display and lights work but temperature never rises.
Main Oven Heating Circuit Failure
F02
Oven overheats well beyond the set temperature; food burns quickly and temperature seems uncontrollable.
Oven Temperature Sensor / Probe Failure
F03
Oven does not reach set temperature; preheat takes excessively long or never reaches target.
Underheating Due to Sensor or Element Fault
F04
Display shows an oven temperature sensor error; oven may shut down or refuse to start.
Oven Sensor Circuit Open or Short
F05
Cooling fan runs at high speed continuously or oven shuts down with fan‑related error.
Cooling Fan Motor or Feedback Fault
F06
Convection fan does not run in convection modes; uneven baking and no air circulation.
Convection Fan Motor Failure
F07
Door lock will not engage for pyrolytic self‑clean; oven displays a door lock error.
Self‑Clean Door Lock Mechanism Failure
F08
Oven door remains locked after self‑clean cycle is complete; error code persists.
Door Lock Stuck Closed
F09
Display shows a communication error; oven functions may be disabled or erratic.
Communication Failure Between User Interface and Main Control
F10
Touch controls are unresponsive or partially responsive; error indicates keypad or touch panel fault.
Capacitive Touch Panel / Keypad Failure
F11
Oven shuts off unexpectedly during operation and displays an over‑temperature or safety error.
Thermal Cut‑Out / Safety Thermostat Trip
F12
Clock and timer functions fail or reset randomly; oven may lose time or settings.
Low Voltage or Power Supply Instability to Control Board
F13
Oven lights do not turn on; error indicates lamp or lighting circuit fault.
Cavity Lamp Circuit Failure
F14
Steam‑assist or moisture function fails; error indicates steam generator or humidity system fault (on steam‑equipped models).
Steam Generator / Humidity System Failure
F15
Gas oven (dual‑fuel models) fails to ignite; error indicates ignition or flame failure.
Gas Ignition Failure
F16
Oven fan runs but there is no heat in convection or grill modes; error indicates element fault.
Convection or Grill Element Failure
F17
Oven displays a probe error when using the meat temperature probe; cooking with probe is disabled.
Meat Probe Sensor or Jack Failure
F18
Oven displays a child lock or safety lock error and will not accept commands.
Control Lock Function Stuck or Faulty
F19
Oven shows a power failure or reset error after outages; may require reprogramming.
Non‑Volatile Memory or Configuration Error
F20
Oven displays a generic fault code and beeps; no specific subsystem indicated.
General System Fault / Internal Error
Symptom
After a power outage, oven settings and clock are lost and must be reprogrammed.
Loss of Volatile Settings on Power Loss
Symptom
Buttons or touch areas on the control panel respond intermittently.
Intermittent Touch Panel Contact
Symptom
Condensation or water droplets form on the inside of the door and drip down during cooking.
Normal Moisture Accumulation Exacerbated by Venting or Seal Issues
Symptom
High‑pitched squealing noise when the convection fan is running.
Convection Fan Bearing Wear
Symptom
Oven cavity enamel is chipped or rust spots appear inside the oven.
Cavity Coating Damage
Symptom
Oven clock loses time slowly over days or weeks.
Clock Timing Drift
Symptom
Oven display is very dim or flickers, but functions still work.
Display Backlight or Power Supply Degradation
Symptom
Oven door does not close fully; heat escapes and cooking is uneven.
Door Hinge or Seal Misalignment
Symptom
Oven door glass becomes excessively hot to the touch during normal baking.
Insufficient Door Insulation or Cooling
Symptom
Oven heats but temperature is inaccurate; food undercooked or overcooked compared to set temperature.
Temperature Calibration or Sensor Drift
Symptom
Oven leaks heat or steam around the door, causing condensation on nearby cabinets.
Door Seal Leakage
Symptom
Oven light works but elements do not heat in one specific mode (e.g., grill only, convection only).
Single Mode Heating Failure
Symptom
Oven makes loud rattling or buzzing noises during operation.
Mechanical Vibration or Fan Noise
Symptom
Oven powers on but will not start any cooking cycle; pressing Start has no effect.
Start Circuit or Door Status Fault
Symptom
Oven produces excessive smoke during normal cooking (not self‑clean).
Combustion of Residual Grease or Spills
Symptom
Oven takes excessively long to preheat; may never reach high temperatures.
Reduced Heating Performance
Symptom
Oven will not turn on at all; display is blank and no lights or fans operate.
No Power to Oven
Symptom
Racks do not slide smoothly; they bind or tip when pulled out.
Rack and Support Wear or Contamination
Symptom
Self‑clean cycle will not start; oven beeps and cancels the cycle.
Self‑Clean Preconditions Not Met
Symptom
Strong burning or electrical smell when the oven is in use.
Overheating Wiring or New Appliance Burn‑In
Symptom
Telescopic racks do not extend or retract smoothly; they stick or feel gritty.
Telescopic Rack Slide Contamination or Wear
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
Oven will not heat in any mode; display and lights work but temperature never rises.
|
Main Oven Heating Circuit Failure | View Details |
| F02 |
Oven overheats well beyond the set temperature; food burns quickly and temperature seems uncontrollable.
|
Oven Temperature Sensor / Probe Failure | View Details |
| F03 |
Oven does not reach set temperature; preheat takes excessively long or never reaches target.
|
Underheating Due to Sensor or Element Fault | View Details |
| F04 |
Display shows an oven temperature sensor error; oven may shut down or refuse to start.
|
Oven Sensor Circuit Open or Short | View Details |
| F05 |
Cooling fan runs at high speed continuously or oven shuts down with fan‑related error.
|
Cooling Fan Motor or Feedback Fault | View Details |
| F06 |
Convection fan does not run in convection modes; uneven baking and no air circulation.
|
Convection Fan Motor Failure | View Details |
| F07 |
Door lock will not engage for pyrolytic self‑clean; oven displays a door lock error.
|
Self‑Clean Door Lock Mechanism Failure | View Details |
| F08 |
Oven door remains locked after self‑clean cycle is complete; error code persists.
|
Door Lock Stuck Closed | View Details |
| F09 |
Display shows a communication error; oven functions may be disabled or erratic.
|
Communication Failure Between User Interface and Main Control | View Details |
| F10 |
Touch controls are unresponsive or partially responsive; error indicates keypad or touch panel fault.
|
Capacitive Touch Panel / Keypad Failure | View Details |
| F11 |
Oven shuts off unexpectedly during operation and displays an over‑temperature or safety error.
|
Thermal Cut‑Out / Safety Thermostat Trip | View Details |
| F12 |
Clock and timer functions fail or reset randomly; oven may lose time or settings.
|
Low Voltage or Power Supply Instability to Control Board | View Details |
| F13 |
Oven lights do not turn on; error indicates lamp or lighting circuit fault.
|
Cavity Lamp Circuit Failure | View Details |
| F14 |
Steam‑assist or moisture function fails; error indicates steam generator or humidity system fault (on steam‑equipped models).
|
Steam Generator / Humidity System Failure | View Details |
| F15 |
Gas oven (dual‑fuel models) fails to ignite; error indicates ignition or flame failure.
|
Gas Ignition Failure | View Details |
| F16 |
Oven fan runs but there is no heat in convection or grill modes; error indicates element fault.
|
Convection or Grill Element Failure | View Details |
| F17 |
Oven displays a probe error when using the meat temperature probe; cooking with probe is disabled.
|
Meat Probe Sensor or Jack Failure | View Details |
| F18 |
Oven displays a child lock or safety lock error and will not accept commands.
|
Control Lock Function Stuck or Faulty | View Details |
| F19 |
Oven shows a power failure or reset error after outages; may require reprogramming.
|
Non‑Volatile Memory or Configuration Error | View Details |
| F20 |
Oven displays a generic fault code and beeps; no specific subsystem indicated.
|
General System Fault / Internal Error | View Details |
| – |
After a power outage, oven settings and clock are lost and must be reprogrammed.
|
Loss of Volatile Settings on Power Loss | View Details |
| – |
Buttons or touch areas on the control panel respond intermittently.
|
Intermittent Touch Panel Contact | View Details |
| – |
Condensation or water droplets form on the inside of the door and drip down during cooking.
|
Normal Moisture Accumulation Exacerbated by Venting or Seal Issues | View Details |
| – |
High‑pitched squealing noise when the convection fan is running.
|
Convection Fan Bearing Wear | View Details |
| – |
Oven cavity enamel is chipped or rust spots appear inside the oven.
|
Cavity Coating Damage | View Details |
| – |
Oven clock loses time slowly over days or weeks.
|
Clock Timing Drift | View Details |
| – |
Oven display is very dim or flickers, but functions still work.
|
Display Backlight or Power Supply Degradation | View Details |
| – |
Oven door does not close fully; heat escapes and cooking is uneven.
|
Door Hinge or Seal Misalignment | View Details |
| – |
Oven door glass becomes excessively hot to the touch during normal baking.
|
Insufficient Door Insulation or Cooling | View Details |
| – |
Oven heats but temperature is inaccurate; food undercooked or overcooked compared to set temperature.
|
Temperature Calibration or Sensor Drift | View Details |
| – |
Oven leaks heat or steam around the door, causing condensation on nearby cabinets.
|
Door Seal Leakage | View Details |
| – |
Oven light works but elements do not heat in one specific mode (e.g., grill only, convection only).
|
Single Mode Heating Failure | View Details |
| – |
Oven makes loud rattling or buzzing noises during operation.
|
Mechanical Vibration or Fan Noise | View Details |
| – |
Oven powers on but will not start any cooking cycle; pressing Start has no effect.
|
Start Circuit or Door Status Fault | View Details |
| – |
Oven produces excessive smoke during normal cooking (not self‑clean).
|
Combustion of Residual Grease or Spills | View Details |
| – |
Oven takes excessively long to preheat; may never reach high temperatures.
|
Reduced Heating Performance | View Details |
| – |
Oven will not turn on at all; display is blank and no lights or fans operate.
|
No Power to Oven | View Details |
| – |
Racks do not slide smoothly; they bind or tip when pulled out.
|
Rack and Support Wear or Contamination | View Details |
| – |
Self‑clean cycle will not start; oven beeps and cancels the cycle.
|
Self‑Clean Preconditions Not Met | View Details |
| – |
Strong burning or electrical smell when the oven is in use.
|
Overheating Wiring or New Appliance Burn‑In | View Details |
| – |
Telescopic racks do not extend or retract smoothly; they stick or feel gritty.
|
Telescopic Rack Slide Contamination or Wear | View Details |
No matching codes found
Advertisements