Hisense Convection Element Failure

Oven fan runs but there is no heat in convection mode; conventional bake may still work.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open convection ring element, Loose or burnt terminals on ring element, Faulty convection relay on control board

Safety first: Turn off power and wait for the oven to cool.

Access ring element: Remove the rear cavity panel to expose the convection element.
Continuity test: Disconnect one terminal and measure resistance. Replace the element if open.
Inspect terminals: Tighten or replace any burnt or loose connectors.
Control board: If the element is good, the convection heater relay may be defective and the board will need replacement.

Medium 3/5

Convection Heating Element (Ring Element)

Check Price on Amazon

We may earn a commission from links on this page.