Hisense Ovens Error Codes

E0

Oven display shows E0 and oven will not start or accept temperature settings.

Temperature Sensor Circuit Fault

E1

E1 error on display, oven does not heat or shuts down shortly after starting.

Upper Heating Element Circuit Fault

E10

E10 error, oven cooling fan runs constantly and oven may not start a new cycle.

Cooling Fan Feedback / Tachometer Fault

E11

E11 error, oven cannot start pyrolytic/self-clean cycle or aborts shortly after starting.

Self-Clean Temperature / Lock Safety Fault

E12

E12 error, oven interior light does not work or flickers, sometimes accompanied by error beeps.

Oven Lamp Circuit Fault

E13

E13 error, timer and clock functions may not operate correctly, oven may not start timed programs.

Clock / Timer Circuit Fault

E14

E14 error, oven may not respond to some touch keys or may register false touches.

Capacitive Touch Key Fault

E15

E15 error, oven stops heating and may show fan symbol flashing.

Convection Heating Circuit Fault

E16

E16 error, oven temperature overshoots set point or fluctuates widely.

Temperature Regulation / PID Control Fault

E17

E17 error, oven display may dim or flicker, and heating may be disabled.

Low Voltage / Internal Power Supply Fault

E18

E18 error, oven cannot detect or control one of the heating zones in a combi or dual-cavity Hisense oven.

Secondary Cavity / Zone Heating Fault

E19

E19 error, oven may show symbols for steam or humidity functions and then abort the program.

Steam / Humidity Sensor Fault (on steam-assist Hisense ovens)

E2

E2 error appears and oven fails to reach set temperature or does not heat at all.

Lower Heating Element Circuit Fault

E20

E20 error, oven fan symbol flashes and fan may run at incorrect speed or not at all.

Fan Speed Control Fault (Inverter or Multi-Speed Models)

E3

E3 error code, oven fan does not run or oven overheats quickly and then shuts off.

Convection Fan Motor Fault

E4

E4 error displayed, oven shuts off or will not start when using grill/broil function.

Grill / Broil Element Circuit Fault

E5

E5 error appears, oven display and buttons may freeze or respond intermittently.

User Interface / Touch Control Communication Fault

E6

E6 error code, oven does not heat and internal cooling fan may run continuously.

Overtemperature Protection / Thermal Cut-Out Tripped

E7

E7 error, oven light and display may work but heating functions are disabled.

Door Lock / Door Switch Fault (Pyrolytic or Child Lock Models)

E8

E8 error code, oven may heat erratically or shut down unexpectedly.

Power Supply / Voltage Error

E9

E9 error, oven beeps and stops heating shortly after start.

Internal Temperature Sensor Out of Range / Calibration Error

Symptom

Oven clock resets to 0:00 or loses time whenever power is cycled or sometimes during use.

Clock Power Backup or Control Board Fault

Symptom

Oven display and clock work, but none of the buttons respond or only some keys work intermittently.

Keypad / Touch Panel Failure

Symptom

Oven does not heat at all, but display and oven light work normally (no error code).

Main Power Relay or Line Fuse Failure

Symptom

Oven door glass is loose, rattling, or has condensation between panes.

Door Glass Assembly or Seal Failure

Symptom

Oven door will not close fully or pops open slightly during operation.

Door Hinge or Latch Misalignment

Symptom

Oven door will not open after cooking (no self-clean cycle active).

Door Lock Mechanism Jammed

Symptom

Oven emits a strong burning smell or smoke during normal cooking (not first use).

Grease or Food Residue Burning, Possible Electrical Overheating

Symptom

Oven enamel is chipped or rust spots appear inside the cavity.

Cavity Coating Damage

Symptom

Oven fan runs but there is no heat in convection mode; conventional bake may still work.

Convection Element Failure

Symptom

Oven grill/broil function works, but standard bake function does not heat.

Lower Element or Bake Circuit Failure

Symptom

Oven heats but cannot reach set temperature or takes excessively long to preheat.

Partial Heating Element Failure or Sensor Drift

Symptom

Oven light stays on all the time, even when the door is closed and oven is off.

Door Switch or Lamp Relay Stuck

Symptom

Oven makes loud banging, scraping, or rattling noises during fan or convection operation.

Fan Blade Obstruction or Motor Bearing Wear

Symptom

Oven overheats, burning food even when set to a moderate temperature (no error code).

Temperature Sensor Out of Calibration or Stuck Relay

Symptom

Oven produces excessive steam or condensation on the door and control panel during cooking.

Ventilation / Moisture Management Issue

Symptom

Oven selector knob feels loose, skips positions, or some functions do not engage.

Function Selector Switch Wear

Symptom

Oven temperature varies significantly between top and bottom of the cavity, causing uneven baking.

Air Circulation / Element Distribution Issue

Symptom

Oven timer counts down but heating does not start until a button is pressed again or door is opened/closed.

Start Logic / Door Switch Interaction Fault

Symptom

Oven trips the circuit breaker or RCD as soon as it is turned on or when heating starts.

Short Circuit or Earth Leakage

Symptom

Oven will not turn on at all, display is blank and no lights (no error code).

No Power / Dead Appliance