Door
Monogram
Door switch or latch status fault
Display shows DOOR or flashes a door icon; oven will not start or self-clean
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Misaligned door latch, Failed door switch, Broken door lock motor assembly, Loose door switch wiring
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing door latch components.
- Check door closure: Ensure the door closes fully and evenly. Adjust racks or remove items preventing full closure.
- Inspect latch: Look at the latch receiver on the oven frame and the hook on the door. If bent or loose, adjust or replace.
- Test door switch: Access the door switch or latch assembly from the front (behind the control panel) or top. Use a multimeter to test switch continuity with the door open and closed. Replace if it does not change state.
- Wiring check: Verify that the switch harness is firmly connected to the control board and not damaged.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Switch / Latch Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements