Monogram Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
Door
Display shows DOOR or flashes a door icon; oven will not start or self-clean
Door switch or latch status fault
F1
Oven beeps continuously and displays F1; may occur at idle or during a bake cycle
Keypad or Electronic Oven Control (EOC) failure
F2
Oven displays F2 and may beep; oven may overheat or shut down during bake or broil
Oven over-temperature condition
F20
F20 error; oven may not heat or may shut down shortly after starting
Communication failure between display board and main control
F3
F3 error appears, oven may shut off or not heat properly
Oven temperature sensor circuit open
F30
F30 error; oven may not heat or may shut off unexpectedly
Upper oven temperature sensor circuit fault (double ovens)
F31
F31 error; lower oven may not heat or may shut off unexpectedly
Lower oven temperature sensor circuit fault (double ovens)
F34
F34 error; convection fan may not run or oven may not reach set temperature in convection mode
Convection fan speed or feedback fault
F4
F4 error appears, oven may not heat correctly or may shut down
Oven temperature sensor circuit shorted
F7
F7 error code with beeping; keys may not respond or may act erratically
Keypad stuck or control board key input failure
F76
F76 error; oven may not start or may shut down during operation
Power relay or triac failure on control board
F8
F8 error code; cooling fan may run continuously or not at all
Cooling fan or fan feedback circuit failure
F9
F9 error; oven door will not lock or unlock during self-clean
Door lock circuit failure
F9E0
F9E0 error; oven will not start and may indicate a communication or configuration problem
Configuration or communication error between user interface and control
LOC
Display shows LOC or control lock icon; oven will not start but no beeping error
Control panel lock (child lock) engaged
Probe
Display shows PROBE or prompts for probe when none is inserted; oven may not start normal bake
Meat probe jack or probe detection circuit fault
SAb
Display shows SAb or Sabbath mode; oven appears unresponsive to normal commands
Sabbath mode active (feature, not a fault)
Symptom
Clicking noises and intermittent heating during operation
Relay cycling or loose electrical connection
Symptom
Control buttons or touch panel are unresponsive or respond intermittently
User interface / keypad failure
Symptom
Convection fan does not run in convection modes; baking is uneven
Convection fan failure
Symptom
Display works but oven will not start any cooking cycle (no relay click, no heat)
Control not energizing heating circuits
Symptom
Excessive heat felt at control panel or surrounding cabinetry during normal baking
Cooling airflow or door seal problem
Symptom
Oven display is completely dead; no lights or response
No power to control system
Symptom
Oven does not heat at all in bake mode (no error code displayed)
Bake circuit failure
Symptom
Oven does not heat in broil mode but bake works normally
Broil circuit failure
Symptom
Oven door will not close fully or appears misaligned
Door hinge or alignment failure
Symptom
Oven door will not unlock after self-clean cycle completes (no error code)
Door lock mechanism stuck after high heat
Symptom
Oven fan runs continuously even when oven is off and cool
Cooling fan stuck on
Symptom
Oven glass door is fogging or condensation forms between glass panes
Door glass seal failure or venting issue
Symptom
Oven heats but does not reach set temperature or takes excessively long to preheat
Temperature regulation or underheating issue
Symptom
Oven light will not turn on, but oven heats normally
Oven cavity lighting failure
Symptom
Oven makes loud rattling or grinding noise when heating
Mechanical noise from fan or loose components
Symptom
Oven overheats and burns food even at normal set temperatures
Overheating / temperature overshoot
Symptom
Oven racks are difficult to slide or make scraping noises
Rack glide or liner wear
Symptom
Oven trips the circuit breaker when heating
Electrical short or overcurrent condition
Symptom
Self-clean cycle will not start; oven otherwise works normally
Self-clean safety interlock failure
Symptom
Strong burning or chemical smell during normal baking (not first use)
Contamination or overheating of internal components
Symptom
Timer and clock work, but oven shuts off before timer ends or randomly during cooking
Intermittent power or control failure
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| Door |
Display shows DOOR or flashes a door icon; oven will not start or self-clean
|
Door switch or latch status fault | View Details |
| F1 |
Oven beeps continuously and displays F1; may occur at idle or during a bake cycle
|
Keypad or Electronic Oven Control (EOC) failure | View Details |
| F2 |
Oven displays F2 and may beep; oven may overheat or shut down during bake or broil
|
Oven over-temperature condition | View Details |
| F20 |
F20 error; oven may not heat or may shut down shortly after starting
|
Communication failure between display board and main control | View Details |
| F3 |
F3 error appears, oven may shut off or not heat properly
|
Oven temperature sensor circuit open | View Details |
| F30 |
F30 error; oven may not heat or may shut off unexpectedly
|
Upper oven temperature sensor circuit fault (double ovens) | View Details |
| F31 |
F31 error; lower oven may not heat or may shut off unexpectedly
|
Lower oven temperature sensor circuit fault (double ovens) | View Details |
| F34 |
F34 error; convection fan may not run or oven may not reach set temperature in convection mode
|
Convection fan speed or feedback fault | View Details |
| F4 |
F4 error appears, oven may not heat correctly or may shut down
|
Oven temperature sensor circuit shorted | View Details |
| F7 |
F7 error code with beeping; keys may not respond or may act erratically
|
Keypad stuck or control board key input failure | View Details |
| F76 |
F76 error; oven may not start or may shut down during operation
|
Power relay or triac failure on control board | View Details |
| F8 |
F8 error code; cooling fan may run continuously or not at all
|
Cooling fan or fan feedback circuit failure | View Details |
| F9 |
F9 error; oven door will not lock or unlock during self-clean
|
Door lock circuit failure | View Details |
| F9E0 |
F9E0 error; oven will not start and may indicate a communication or configuration problem
|
Configuration or communication error between user interface and control | View Details |
| LOC |
Display shows LOC or control lock icon; oven will not start but no beeping error
|
Control panel lock (child lock) engaged | View Details |
| Probe |
Display shows PROBE or prompts for probe when none is inserted; oven may not start normal bake
|
Meat probe jack or probe detection circuit fault | View Details |
| SAb |
Display shows SAb or Sabbath mode; oven appears unresponsive to normal commands
|
Sabbath mode active (feature, not a fault) | View Details |
| – |
Clicking noises and intermittent heating during operation
|
Relay cycling or loose electrical connection | View Details |
| – |
Control buttons or touch panel are unresponsive or respond intermittently
|
User interface / keypad failure | View Details |
| – |
Convection fan does not run in convection modes; baking is uneven
|
Convection fan failure | View Details |
| – |
Display works but oven will not start any cooking cycle (no relay click, no heat)
|
Control not energizing heating circuits | View Details |
| – |
Excessive heat felt at control panel or surrounding cabinetry during normal baking
|
Cooling airflow or door seal problem | View Details |
| – |
Oven display is completely dead; no lights or response
|
No power to control system | View Details |
| – |
Oven does not heat at all in bake mode (no error code displayed)
|
Bake circuit failure | View Details |
| – |
Oven does not heat in broil mode but bake works normally
|
Broil circuit failure | View Details |
| – |
Oven door will not close fully or appears misaligned
|
Door hinge or alignment failure | View Details |
| – |
Oven door will not unlock after self-clean cycle completes (no error code)
|
Door lock mechanism stuck after high heat | View Details |
| – |
Oven fan runs continuously even when oven is off and cool
|
Cooling fan stuck on | View Details |
| – |
Oven glass door is fogging or condensation forms between glass panes
|
Door glass seal failure or venting issue | View Details |
| – |
Oven heats but does not reach set temperature or takes excessively long to preheat
|
Temperature regulation or underheating issue | View Details |
| – |
Oven light will not turn on, but oven heats normally
|
Oven cavity lighting failure | View Details |
| – |
Oven makes loud rattling or grinding noise when heating
|
Mechanical noise from fan or loose components | View Details |
| – |
Oven overheats and burns food even at normal set temperatures
|
Overheating / temperature overshoot | View Details |
| – |
Oven racks are difficult to slide or make scraping noises
|
Rack glide or liner wear | View Details |
| – |
Oven trips the circuit breaker when heating
|
Electrical short or overcurrent condition | View Details |
| – |
Self-clean cycle will not start; oven otherwise works normally
|
Self-clean safety interlock failure | View Details |
| – |
Strong burning or chemical smell during normal baking (not first use)
|
Contamination or overheating of internal components | View Details |
| – |
Timer and clock work, but oven shuts off before timer ends or randomly during cooking
|
Intermittent power or control failure | View Details |
No matching codes found
Advertisements