Monogram
Door hinge or alignment failure
Oven door will not close fully or appears misaligned
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Bent door hinges, Worn hinge springs, Loose hinge receiver brackets, Warped door
How to Fix / Troubleshooting
Safety first: Turn off power if removing the door to avoid accidental heating.
- Inspect hinges: Open the door and check both door hinges for bending, cracks, or missing hinge locks.
- Remove and reseat door: Many Monogram doors lift off the hinges at a partially open angle. Remove the door, inspect hinge arms and receivers, then reinstall carefully to ensure proper engagement.
- Replace hinges: If the door sags or will not close tightly, replace both hinges as a set to maintain even tension.
- Check gasket: Ensure the door gasket is not bunched up or preventing closure. Replace if damaged.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinge
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements