E16
Montpellier Touch Control Panel Fault

E16 error, touch controls are unresponsive or behave erratically.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Damaged touch glass, Faulty capacitive touch PCB, Moisture or grease under control panel, Loose ribbon cable to main board

How to Fix / Troubleshooting

Safety first: Disconnect the oven from mains power before removing the control panel.

Steps to check:

  • Clean surface: Wipe the touch glass with a soft, dry cloth. Remove any moisture or grease that may interfere with touch detection.
  • Power reset: Turn off power for 5 minutes, then restore and test the controls.
  • Access panel: Remove the screws securing the control panel and gently pull it forward to access the touch PCB and ribbon cable.
  • Check cable: Reseat the ribbon cable between the touch PCB and main board.
  • Inspect PCB: Look for cracks, corrosion, or burnt components on the touch PCB.
  • Replace touch PCB: If cleaning and reseating cables do not help, replace the touch control PCB or complete control panel assembly.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Touch Control Panel PCB
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements