Montpellier
Montpellier Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Oven display shows E0 and oven will not start or accept temperature settings.
Temperature Sensor Circuit Fault
E1
Oven displays E1 and will not heat or stops shortly after starting.
Oven Cavity Overtemperature / Sensor Out of Range
E10
E10 error, oven display and lights work but no heating in any mode.
Heating Circuit General Fault
E11
E11 error, oven clock and timer work but oven cannot be started.
Timer / Clock Lockout Fault
E12
E12 error, oven interior light and fan may work but grill or main oven element does not heat.
Grill / Top Element Circuit Fault
E13
E13 error, oven fan runs but bottom element does not heat in conventional modes.
Bottom Element Circuit Fault
E14
E14 error, oven light and display work but fan-assisted modes do not heat.
Convection Element Circuit Fault
E15
E15 error, oven display flickers or resets when heating is started.
Low Voltage / Power Supply Instability
E16
E16 error, touch controls are unresponsive or behave erratically.
Touch Control Panel Fault
E17
E17 error, oven door remains locked after pyrolytic cleaning cycle or will not lock to start cycle.
Pyrolytic Lock System Fault
E18
E18 error, oven interior light does not work and some functions may be disabled.
Cavity Light Circuit Fault
E19
E19 error, oven beeps and shuts down shortly after starting a program.
Internal Overheat / Cooling System Fault
E2
E2 error on display, oven does not heat or heats erratically.
Temperature Sensor Open Circuit
E3
E3 error appears and oven overheats or burns food quickly.
Temperature Sensor Short Circuit / Overheat Detection
E4
E4 error code, oven fan runs but heating is disabled.
Cooling Fan or Overheat Thermostat Fault
E5
E5 error on display, oven will not heat or cuts out shortly after starting.
Overheat Safety Thermostat Open
E6
E6 error appears, oven functions are limited or disabled.
Control Panel Communication Error
E7
E7 error code, oven beeps and will not start a cooking program.
Door Lock / Door Switch Fault (Pyrolytic or Safety Lock Models)
E8
E8 error on display, oven fan may run but heating is disabled.
Fan Motor or Fan Speed Feedback Fault
E9
E9 error code, oven cuts out or will not start; sometimes accompanied by tripping the breaker.
Power Supply / Relay Board Fault
Symptom
Condensation forms on the oven door glass and sometimes drips onto the floor.
Condensation / Venting Behaviour
Symptom
Electronic clock/timer display is blank or very dim, but oven still heats using manual controls (on some models).
Display / Timer Power Fault
Symptom
Excessive heat felt on control panel or surrounding cabinetry during normal cooking.
Cooling / Ventilation Deficiency
Symptom
Grill does not work; other oven functions heat normally.
Grill Element or Grill Circuit Failure
Symptom
New Montpellier oven emits strong chemical or paint smell on first few uses.
Initial Curing Odour
Symptom
Oven does not heat at all; display and light work but no warmth in any mode.
Main Heating Circuit Failure
Symptom
Oven door does not stay closed; it springs open slightly during cooking.
Door Hinge Spring / Latch Weakness
Symptom
Oven door glass is stained between the inner and outer panes and cannot be cleaned from inside or outside.
Contamination Between Door Glass Layers
Symptom
Oven door will not close fully or sits unevenly, causing heat to escape.
Door Hinge / Door Alignment Fault
Symptom
Oven emits a buzzing or humming noise from the control area when heating.
Electrical / Relay or Transformer Noise
Symptom
Oven enamel or interior coating is chipped or flaking.
Cavity Enamel Damage
Symptom
Oven fan runs but there is no heat in fan-assisted modes; conventional top/bottom heat may still work.
Convection (Fan) Element Failure
Symptom
Oven heats but does not reach set temperature or takes excessively long to cook food.
Temperature Regulation / Underheating
Symptom
Oven interior light does not work but all heating functions operate normally.
Cavity Lamp Failure
Symptom
Oven light works but fan and heating do not start when a function is selected.
Function Selector Switch Failure
Symptom
Oven makes loud rattling or scraping noises when the fan is running.
Fan Motor / Fan Blade Noise
Symptom
Oven overheats and burns food even at low temperature settings.
Thermostat / Sensor Overheating Fault
Symptom
Oven produces a strong burning smell or smoke during normal cooking (not first use).
Grease / Food Residue Combustion
Symptom
Oven timer counts down but heating does not start or stops when timer reaches zero.
Incorrect Timer Mode / Auto Program Misuse
Symptom
Oven trips the circuit breaker or RCD as soon as a heating function is selected.
Earth Leakage / Short Circuit in Heating Circuit
Symptom
Oven will not start; controls appear locked and a key symbol may be shown on the display.
Child Lock / Control Lock Activated
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Oven display shows E0 and oven will not start or accept temperature settings.
|
Temperature Sensor Circuit Fault | View Details |
| E1 |
Oven displays E1 and will not heat or stops shortly after starting.
|
Oven Cavity Overtemperature / Sensor Out of Range | View Details |
| E10 |
E10 error, oven display and lights work but no heating in any mode.
|
Heating Circuit General Fault | View Details |
| E11 |
E11 error, oven clock and timer work but oven cannot be started.
|
Timer / Clock Lockout Fault | View Details |
| E12 |
E12 error, oven interior light and fan may work but grill or main oven element does not heat.
|
Grill / Top Element Circuit Fault | View Details |
| E13 |
E13 error, oven fan runs but bottom element does not heat in conventional modes.
|
Bottom Element Circuit Fault | View Details |
| E14 |
E14 error, oven light and display work but fan-assisted modes do not heat.
|
Convection Element Circuit Fault | View Details |
| E15 |
E15 error, oven display flickers or resets when heating is started.
|
Low Voltage / Power Supply Instability | View Details |
| E16 |
E16 error, touch controls are unresponsive or behave erratically.
|
Touch Control Panel Fault | View Details |
| E17 |
E17 error, oven door remains locked after pyrolytic cleaning cycle or will not lock to start cycle.
|
Pyrolytic Lock System Fault | View Details |
| E18 |
E18 error, oven interior light does not work and some functions may be disabled.
|
Cavity Light Circuit Fault | View Details |
| E19 |
E19 error, oven beeps and shuts down shortly after starting a program.
|
Internal Overheat / Cooling System Fault | View Details |
| E2 |
E2 error on display, oven does not heat or heats erratically.
|
Temperature Sensor Open Circuit | View Details |
| E3 |
E3 error appears and oven overheats or burns food quickly.
|
Temperature Sensor Short Circuit / Overheat Detection | View Details |
| E4 |
E4 error code, oven fan runs but heating is disabled.
|
Cooling Fan or Overheat Thermostat Fault | View Details |
| E5 |
E5 error on display, oven will not heat or cuts out shortly after starting.
|
Overheat Safety Thermostat Open | View Details |
| E6 |
E6 error appears, oven functions are limited or disabled.
|
Control Panel Communication Error | View Details |
| E7 |
E7 error code, oven beeps and will not start a cooking program.
|
Door Lock / Door Switch Fault (Pyrolytic or Safety Lock Models) | View Details |
| E8 |
E8 error on display, oven fan may run but heating is disabled.
|
Fan Motor or Fan Speed Feedback Fault | View Details |
| E9 |
E9 error code, oven cuts out or will not start; sometimes accompanied by tripping the breaker.
|
Power Supply / Relay Board Fault | View Details |
| – |
Condensation forms on the oven door glass and sometimes drips onto the floor.
|
Condensation / Venting Behaviour | View Details |
| – |
Electronic clock/timer display is blank or very dim, but oven still heats using manual controls (on some models).
|
Display / Timer Power Fault | View Details |
| – |
Excessive heat felt on control panel or surrounding cabinetry during normal cooking.
|
Cooling / Ventilation Deficiency | View Details |
| – |
Grill does not work; other oven functions heat normally.
|
Grill Element or Grill Circuit Failure | View Details |
| – |
New Montpellier oven emits strong chemical or paint smell on first few uses.
|
Initial Curing Odour | View Details |
| – |
Oven does not heat at all; display and light work but no warmth in any mode.
|
Main Heating Circuit Failure | View Details |
| – |
Oven door does not stay closed; it springs open slightly during cooking.
|
Door Hinge Spring / Latch Weakness | View Details |
| – |
Oven door glass is stained between the inner and outer panes and cannot be cleaned from inside or outside.
|
Contamination Between Door Glass Layers | View Details |
| – |
Oven door will not close fully or sits unevenly, causing heat to escape.
|
Door Hinge / Door Alignment Fault | View Details |
| – |
Oven emits a buzzing or humming noise from the control area when heating.
|
Electrical / Relay or Transformer Noise | View Details |
| – |
Oven enamel or interior coating is chipped or flaking.
|
Cavity Enamel Damage | View Details |
| – |
Oven fan runs but there is no heat in fan-assisted modes; conventional top/bottom heat may still work.
|
Convection (Fan) Element Failure | View Details |
| – |
Oven heats but does not reach set temperature or takes excessively long to cook food.
|
Temperature Regulation / Underheating | View Details |
| – |
Oven interior light does not work but all heating functions operate normally.
|
Cavity Lamp Failure | View Details |
| – |
Oven light works but fan and heating do not start when a function is selected.
|
Function Selector Switch Failure | View Details |
| – |
Oven makes loud rattling or scraping noises when the fan is running.
|
Fan Motor / Fan Blade Noise | View Details |
| – |
Oven overheats and burns food even at low temperature settings.
|
Thermostat / Sensor Overheating Fault | View Details |
| – |
Oven produces a strong burning smell or smoke during normal cooking (not first use).
|
Grease / Food Residue Combustion | View Details |
| – |
Oven timer counts down but heating does not start or stops when timer reaches zero.
|
Incorrect Timer Mode / Auto Program Misuse | View Details |
| – |
Oven trips the circuit breaker or RCD as soon as a heating function is selected.
|
Earth Leakage / Short Circuit in Heating Circuit | View Details |
| – |
Oven will not start; controls appear locked and a key symbol may be shown on the display.
|
Child Lock / Control Lock Activated | View Details |
No matching codes found
Advertisements