E10
Tower
Timer / Clock Module Fault
Oven shows E10 and the clock/timer cannot be set; cooking functions may be disabled.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed electronic timer module, Stuck timer buttons, Corroded timer connector, Internal timer power supply fault
How to Fix / Troubleshooting
Safety first: Turn off power before removing the control panel.
Steps to check:
- Power reset: Disconnect power for 10 minutes to reset the timer module. Restore power and attempt to set the time according to the Tower manual.
- Button check: Press each timer button repeatedly to free any that may be sticking. If a button is physically jammed, the fascia or switch may need replacement.
- Inspect module: Remove the control panel and locate the timer/clock PCB. Check the connector for secure fit and signs of heat damage.
- Replacement: If the timer remains unresponsive or E10 persists, replace the timer/clock module with the correct Tower part number.
Note: Many Tower ovens will not operate unless the clock is set; resolving timer issues is essential for normal use.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Electronic Timer / Clock Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements