E14
Wolf
Internal Temperature Sensor or Cooling Error
Wolf oven shows E14 and may shut down during long cooking cycles.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Overheating of control compartment, Failed cooling fan, Blocked control panel vents, Faulty internal thermistor on control board
How to Fix / Troubleshooting
Safety: Turn off power and allow the oven to cool.
Checks:
- Inspect the control panel vents and top vents for blockage by cabinetry, foil, or debris.
- Verify that the cooling fan runs when the oven is hot; if not, test and replace as needed.
- Ensure there is adequate clearance around the oven per Wolf installation specifications.
If airflow is correct and fan is working:
- The internal thermistor on the control board may be faulty, causing false overheat detection.
- Replace the main control board if E14 persists after verifying cooling system operation.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements