Wolf Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Wolf wall oven will not heat; display shows E01 shortly after a bake or broil cycle is started.
Upper Oven Temperature Sensor Circuit Fault
E02
Wolf oven shows E02 and will not start or prematurely shuts off during preheat.
Lower Oven Temperature Sensor Circuit Fault
E03
Wolf oven displays E03 and may shut down during operation or fail to start a cycle.
Oven Over-Temperature Fault
E04
Wolf oven shows E04 and the display or touch panel may be unresponsive or erratic.
User Interface / Touch Panel Communication Error
E05
Wolf oven displays E05 and will not heat in bake or broil modes.
Relay Board or Power Board Failure
E06
Wolf oven shows E06 and convection fan does not run or runs erratically.
Convection Fan Motor or Feedback Fault
E07
Wolf oven displays E07 and interior lights or auxiliary loads may not function correctly.
Low-Voltage Power Supply Fault
E08
Wolf oven shows E08 and may trip the breaker or fail to power up fully.
Line Voltage or Power Input Error
E09
Wolf oven displays E09 and cooling fan may run continuously or not at all.
Cooling Fan Circuit Fault
E10
Wolf oven shows E10 and door lock may not operate correctly during self-clean.
Door Lock Motor or Switch Fault
E11
Wolf oven displays E11 and the door remains locked after self-clean or will not lock to start self-clean.
Door Lock Position Error
E12
Wolf oven shows E12 and may not respond to some touch commands.
Keypad / Touch Sensor Fault
E13
Wolf oven displays E13 and time or temperature settings may reset unexpectedly.
Non-Volatile Memory or Configuration Error
E14
Wolf oven shows E14 and may shut down during long cooking cycles.
Internal Temperature Sensor or Cooling Error
E15
Wolf oven displays E15 and may not recognize temperature changes correctly.
Calibration / Sensor Range Error
E20
Wolf dual-fuel range oven shows E20 and gas bake will not ignite.
Gas Bake Ignition Failure
E21
Wolf dual-fuel range oven shows E21 and broil burner will not light.
Gas Broil Ignition Failure
E22
Wolf dual-fuel oven shows E22 and may shut off gas burners unexpectedly.
Flame Sensing / Flame Rectification Error
E30
Wolf oven with temperature probe feature shows E30 and will not start a probe cook cycle.
Meat Probe Sensor Fault
E31
Wolf oven shows E31 and may incorrectly detect a probe inserted when none is present.
Meat Probe Short / False Detection
E40
Wolf oven shows E40 and will not start a self-clean cycle.
Self-Clean System Fault
E41
Wolf oven shows E41 and fan or elements may continue running after cycle ends.
Stuck Relay or Output Error
Symptom
Wolf dual-fuel oven smells strongly of gas when attempting to ignite, and burner does not light.
Gas Ignition Failure with Gas Odor
Symptom
Wolf electric oven heats but cannot reach set temperature or takes excessively long to preheat.
Insufficient Heating / Long Preheat
Symptom
Wolf electric wall oven does not heat at all in bake or broil; display appears normal and no error code is shown.
No-Heat Condition (Electric Elements)
Symptom
Wolf oven clock loses time or resets after power fluctuations.
Clock / Timekeeping Issue
Symptom
Wolf oven control panel buttons are unresponsive or respond intermittently.
User Interface Input Failure
Symptom
Wolf oven display is dim, flickering, or some segments are missing, but oven still heats.
Display / LED Module Degradation
Symptom
Wolf oven display works but oven will not start any cooking cycle; pressing Start does nothing.
Control Lock / Input or Door Switch Issue
Symptom
Wolf oven door will not close fully; light stays on and heat escapes.
Door Alignment / Hinge or Gasket Failure
Symptom
Wolf oven door will not unlock after self-clean; no error code is displayed.
Door Stuck Locked After Self-Clean
Symptom
Wolf oven emits a strong burning smell or smoke during normal baking (not first use or self-clean).
Burning Odor / Smoke During Operation
Symptom
Wolf oven fan runs continuously long after cooking is finished and oven is cool to the touch.
Cooling Fan Stuck On
Symptom
Wolf oven glass door becomes extremely hot to the touch during normal baking.
Door Heat Insulation / Venting Problem
Symptom
Wolf oven interior light does not work, but oven heats normally.
Oven Cavity Light Failure
Symptom
Wolf oven makes loud banging, grinding, or rattling noises during convection bake.
Convection Fan Noise / Imbalance
Symptom
Wolf oven overheats; food burns even when set to normal temperatures and no error code is displayed.
Runaway Temperature / Overheating
Symptom
Wolf oven produces excessive steam or moisture on the door glass and control panel during cooking.
Excessive Condensation / Venting Issue
Symptom
Wolf oven racks are difficult to slide or make scraping noises when moving.
Rack Glide / Support Wear
Symptom
Wolf oven temperature is inconsistent; sometimes too hot, sometimes too cool, with uneven baking results.
Temperature Regulation / Cycling Problem
Symptom
Wolf oven trips the circuit breaker when starting a bake or broil cycle.
Short Circuit Under Load
Symptom
Wolf oven will not start; display is blank and no lights or sounds are present.
No Power / Dead Oven
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Wolf wall oven will not heat; display shows E01 shortly after a bake or broil cycle is started.
|
Upper Oven Temperature Sensor Circuit Fault | View Details |
| E02 |
Wolf oven shows E02 and will not start or prematurely shuts off during preheat.
|
Lower Oven Temperature Sensor Circuit Fault | View Details |
| E03 |
Wolf oven displays E03 and may shut down during operation or fail to start a cycle.
|
Oven Over-Temperature Fault | View Details |
| E04 |
Wolf oven shows E04 and the display or touch panel may be unresponsive or erratic.
|
User Interface / Touch Panel Communication Error | View Details |
| E05 |
Wolf oven displays E05 and will not heat in bake or broil modes.
|
Relay Board or Power Board Failure | View Details |
| E06 |
Wolf oven shows E06 and convection fan does not run or runs erratically.
|
Convection Fan Motor or Feedback Fault | View Details |
| E07 |
Wolf oven displays E07 and interior lights or auxiliary loads may not function correctly.
|
Low-Voltage Power Supply Fault | View Details |
| E08 |
Wolf oven shows E08 and may trip the breaker or fail to power up fully.
|
Line Voltage or Power Input Error | View Details |
| E09 |
Wolf oven displays E09 and cooling fan may run continuously or not at all.
|
Cooling Fan Circuit Fault | View Details |
| E10 |
Wolf oven shows E10 and door lock may not operate correctly during self-clean.
|
Door Lock Motor or Switch Fault | View Details |
| E11 |
Wolf oven displays E11 and the door remains locked after self-clean or will not lock to start self-clean.
|
Door Lock Position Error | View Details |
| E12 |
Wolf oven shows E12 and may not respond to some touch commands.
|
Keypad / Touch Sensor Fault | View Details |
| E13 |
Wolf oven displays E13 and time or temperature settings may reset unexpectedly.
|
Non-Volatile Memory or Configuration Error | View Details |
| E14 |
Wolf oven shows E14 and may shut down during long cooking cycles.
|
Internal Temperature Sensor or Cooling Error | View Details |
| E15 |
Wolf oven displays E15 and may not recognize temperature changes correctly.
|
Calibration / Sensor Range Error | View Details |
| E20 |
Wolf dual-fuel range oven shows E20 and gas bake will not ignite.
|
Gas Bake Ignition Failure | View Details |
| E21 |
Wolf dual-fuel range oven shows E21 and broil burner will not light.
|
Gas Broil Ignition Failure | View Details |
| E22 |
Wolf dual-fuel oven shows E22 and may shut off gas burners unexpectedly.
|
Flame Sensing / Flame Rectification Error | View Details |
| E30 |
Wolf oven with temperature probe feature shows E30 and will not start a probe cook cycle.
|
Meat Probe Sensor Fault | View Details |
| E31 |
Wolf oven shows E31 and may incorrectly detect a probe inserted when none is present.
|
Meat Probe Short / False Detection | View Details |
| E40 |
Wolf oven shows E40 and will not start a self-clean cycle.
|
Self-Clean System Fault | View Details |
| E41 |
Wolf oven shows E41 and fan or elements may continue running after cycle ends.
|
Stuck Relay or Output Error | View Details |
| – |
Wolf dual-fuel oven smells strongly of gas when attempting to ignite, and burner does not light.
|
Gas Ignition Failure with Gas Odor | View Details |
| – |
Wolf electric oven heats but cannot reach set temperature or takes excessively long to preheat.
|
Insufficient Heating / Long Preheat | View Details |
| – |
Wolf electric wall oven does not heat at all in bake or broil; display appears normal and no error code is shown.
|
No-Heat Condition (Electric Elements) | View Details |
| – |
Wolf oven clock loses time or resets after power fluctuations.
|
Clock / Timekeeping Issue | View Details |
| – |
Wolf oven control panel buttons are unresponsive or respond intermittently.
|
User Interface Input Failure | View Details |
| – |
Wolf oven display is dim, flickering, or some segments are missing, but oven still heats.
|
Display / LED Module Degradation | View Details |
| – |
Wolf oven display works but oven will not start any cooking cycle; pressing Start does nothing.
|
Control Lock / Input or Door Switch Issue | View Details |
| – |
Wolf oven door will not close fully; light stays on and heat escapes.
|
Door Alignment / Hinge or Gasket Failure | View Details |
| – |
Wolf oven door will not unlock after self-clean; no error code is displayed.
|
Door Stuck Locked After Self-Clean | View Details |
| – |
Wolf oven emits a strong burning smell or smoke during normal baking (not first use or self-clean).
|
Burning Odor / Smoke During Operation | View Details |
| – |
Wolf oven fan runs continuously long after cooking is finished and oven is cool to the touch.
|
Cooling Fan Stuck On | View Details |
| – |
Wolf oven glass door becomes extremely hot to the touch during normal baking.
|
Door Heat Insulation / Venting Problem | View Details |
| – |
Wolf oven interior light does not work, but oven heats normally.
|
Oven Cavity Light Failure | View Details |
| – |
Wolf oven makes loud banging, grinding, or rattling noises during convection bake.
|
Convection Fan Noise / Imbalance | View Details |
| – |
Wolf oven overheats; food burns even when set to normal temperatures and no error code is displayed.
|
Runaway Temperature / Overheating | View Details |
| – |
Wolf oven produces excessive steam or moisture on the door glass and control panel during cooking.
|
Excessive Condensation / Venting Issue | View Details |
| – |
Wolf oven racks are difficult to slide or make scraping noises when moving.
|
Rack Glide / Support Wear | View Details |
| – |
Wolf oven temperature is inconsistent; sometimes too hot, sometimes too cool, with uneven baking results.
|
Temperature Regulation / Cycling Problem | View Details |
| – |
Wolf oven trips the circuit breaker when starting a bake or broil cycle.
|
Short Circuit Under Load | View Details |
| – |
Wolf oven will not start; display is blank and no lights or sounds are present.
|
No Power / Dead Oven | View Details |
No matching codes found
Advertisements