Wolf No Power / Dead Oven

Wolf oven will not start; display is blank and no lights or sounds are present.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Tripped house breaker, Loose or burned terminal block, Failed line fuse (if equipped), Defective main control board power supply

Safety: Before touching wiring, turn off the breaker and confirm no voltage is present.

Steps:

Check the circuit breaker or fuse panel and reset any tripped breaker.
Pull the oven out and inspect the terminal block or junction box for loose or burned connections; repair as needed.
If the model has an internal line fuse, test it for continuity and replace if open (after identifying and correcting the cause of the overload).
If power is present at the control board but the display remains dead, replace the main control board.

Medium 3/5

Terminal Block

Check Price on Amazon

We may earn a commission from links on this page.