Wolf Temperature Regulation / Cycling Problem

Wolf oven temperature is inconsistent; sometimes too hot, sometimes too cool, with uneven baking results.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Intermittent temperature sensor, Loose sensor connection, Control board relay chatter, Poor rack placement or overloading

Steps:

Verify proper rack placement and avoid overcrowding the oven, which can affect air circulation.
Test the temperature sensor resistance at room temperature and while gently heating; look for intermittent jumps in resistance.
Inspect and reseat the sensor connector at the control board.

Corrective actions:

Replace an intermittent temperature sensor.
If the sensor is stable but temperature swings remain large, the control board may be misregulating and should be replaced.

Medium 3/5

Oven Temperature Sensor (RTD)

Check Price on Amazon

We may earn a commission from links on this page.