ERR19
Gourmet Grillson
Combustion Fan Speed / Feedback Fault
Display shows ERR19; grill reports a fan speed error or low airflow condition.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Fan speed sensor failure (if equipped), Fan motor running slow due to bearing wear, Obstructed fan intake or exhaust, Loose fan connector
How to Fix / Troubleshooting
Safety first: Unplug the grill before accessing the fan.
- Clean fan and intake: Remove the fan cover and clean grease, dust, and debris from the fan blades and intake vents.
- Check for free rotation: Spin the fan by hand. It should rotate smoothly without grinding. Replace the fan motor if it feels rough or stiff.
- Inspect connector: Ensure the fan and any attached speed sensor connectors are fully seated on the harness and control board.
- Test operation: Reassemble, power on, and start the grill. Listen for steady fan speed. If ERR19 persists and the fan is mechanically sound, the speed sensor or control board may need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Combustion Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements