Gourmet Grillson
Ignition Failure Without Error Code
Grill powers on but will not ignite; pellets feed into firepot but never light and smoke remains white and cool.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Weak or burned-out hot rod igniter, Igniter not positioned correctly in firepot, Excessive ash insulating pellets from igniter, Low combustion airflow
How to Fix / Troubleshooting
Safety first: Turn OFF and unplug the grill. Allow all pellets and components to cool before working in the firepot.
- Clean firepot: Remove grates and diffuser. Vacuum all ash and unburned pellets from the firepot. Ensure the igniter hole is clear.
- Check igniter position: The tip of the Gourmet Grillson igniter should protrude slightly into the firepot or align with the igniter hole. Adjust mounting so the hot section is close to the pellets.
- Test igniter glow: With the firepot empty, plug in and start the grill with the lid open. After 2–4 minutes, look for a bright red glow from the igniter. If there is no glow, replace the igniter assembly.
- Verify airflow: Listen for the combustion fan during startup. If the fan is not running, diagnose and repair the fan circuit to ensure adequate oxygen for ignition.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Hot Rod Igniter Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements