Pump causes excessive vibration and movement on the equipment pad.

Safety first: Turn off power before touching the pump or plumbing.

Steps to reduce vibration:

• Inspect impeller: Remove the pump lid and basket, check for debris in the impeller, and clear as needed.
• Secure mounting: Tighten the Jacuzzi pump mounting bolts to the pad. Use vibration pads if necessary.
• Check alignment: Ensure plumbing lines are not forcing the pump out of alignment. Support pipes with proper hangers.
• Level the pad: If the pad is uneven, shim under the pump base to stabilize.

Severe vibration with a clean impeller may indicate a bent shaft or damaged impeller requiring replacement.