How to Fix / Troubleshooting

Safety first: Isolate the appliance from mains and ensure the oven is cool.

Access fan: Remove the inner rear panel of the oven to expose the fan blade. Check for obstructions such as foil or food debris and remove them.
Spin test: Rotate the fan by hand. If stiff or seized, replace the oven fan motor.
Electrical test: From the rear of the cooker, access the fan motor terminals and measure resistance. An open circuit indicates a failed motor.
Check wiring: Inspect the harness from the fan to the control board for heat damage or loose connectors. Repair as needed.
Control board: If the motor is good but never receives power in fan modes, the fan relay on the electronic control board may be faulty and the board should be replaced.
Re-test: After repair, run a fan-assisted mode and confirm that the fan runs smoothly and E60 is cleared.

Electric oven shows E60 and fan-assisted functions are unavailable.

Possible Causes