Amica Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Electric oven will not heat, display shows E01 shortly after a heating command is selected.
Oven Temperature Sensor Circuit Fault
E02
Oven overheats or shuts off with E02 displayed, sometimes accompanied by a strong heat surge.
Oven Overtemperature / Sensor Range Error
E03
Electric oven does not heat and E03 appears shortly after start, fan may run but no elements energize.
Oven Heating Circuit Failure
E04
Induction cooktop zone will not heat and E04 is displayed for that zone.
Induction Power Module Overtemperature / Cooling Fault
E05
Induction hob zone does not start, beeps, and shows E05 when a pan is placed.
Induction IGBT / Power Stage Fault
E06
Induction hob shows E06 and all zones are disabled.
Hob Glass Surface Temperature Sensor Fault
E07
Induction hob displays E07 and does not respond to touch controls.
Touch Control Panel Communication Error
E08
Induction hob zone shuts down with E08 when used at high power for several minutes.
Induction Zone Overcurrent / Pan Detection Anomaly
E09
Induction hob shows E09 and all zones are locked out.
Internal Hob Electronics Fault
E10
Induction hob displays E10 and beeps when turned on, no zones can be activated.
Supply Voltage Out of Range
E11
Induction hob zone flashes E11 when a pan is placed and does not heat.
Pan Detection Failure
E12
Induction hob shows E12 intermittently, often after long cooking sessions.
Hob Internal Overtemperature Protection
E20
Electric oven display shows E20 and the cooling fan runs continuously, oven may not heat.
Oven Cavity Temperature Sensor / Cooling System Fault
E21
Electric oven shows E21 and the convection (fan) function does not operate correctly.
Convection Fan Motor / Feedback Fault
E30
Gas hob with electronic ignition shows E30 on the display and burners will not ignite automatically.
Ignition System Fault
E31
Gas hob with flame supervision shows E31 and gas supply to one or more burners is cut off shortly after ignition.
Flame Failure Device / Thermocouple Fault
E40
Electric range display shows E40 and none of the oven functions can be selected.
User Interface / Keypad Fault
E41
Electric range shows E41 and the clock/timer functions erratically or reset themselves.
Low Voltage / Power Supply to Control Board
E50
Electric oven shows E50 and the grill function does not operate.
Grill Element / Circuit Fault
E60
Electric oven shows E60 and fan-assisted functions are unavailable.
Oven Fan Motor / Feedback Error
E70
Electric oven shows E70 and interior light does not work, some functions may be disabled.
Oven Lamp / Door Status Circuit Fault
Symptom
Control knobs on the range are very stiff or difficult to turn.
Seized Valve Spindle / Contaminated Knob Mechanism
Symptom
Digital clock/timer on the range does not retain time after a power interruption and must be reset frequently.
Control Board Backup / Power Supply Issue
Symptom
Electric oven does not heat at all, no error code displayed, clock and lights work.
Main Oven Heating Circuit Open
Symptom
Electric oven trips the circuit breaker (RCD/MCB) when turned on.
Oven Element Short to Earth
Symptom
Gas hob burner goes out when the knob is released, even though it lights initially.
Flame Failure Device Not Holding
Symptom
Gas hob burner will not ignite or has a very weak flame, no electronic error code.
Gas Burner Ignition / Flame Quality Issue
Symptom
Gas hob ignition keeps clicking continuously even when all burners are off.
Stuck Ignition Switch / Moisture in Ignition System
Symptom
Gas hob produces a loud popping noise or uneven flame when operating.
Incorrect Gas/Air Mixture at Burner
Symptom
Induction hob controls are unresponsive or randomly change settings without any error code.
Touch Control Panel Malfunction
Symptom
Induction hob does not detect any pans on one specific zone, but other zones work.
Single Induction Zone Detection Failure
Symptom
Induction hob zone intermittently shuts off or reduces power without any error code.
Induction Zone Thermal / Power Management Limiting
Symptom
Oven door glass becomes excessively hot to touch during normal operation.
Door Cooling / Insulation Inefficiency
Symptom
Oven door will not close fully, heat escapes around the edges, no error code.
Door Hinge / Seal Misalignment
Symptom
Oven heats but temperature is significantly inaccurate (too hot or too cold) without any error code.
Oven Temperature Calibration / Sensor Drift
Symptom
Oven interior light does not work, but oven heats normally.
Oven Lamp Failure
Symptom
Oven leaks heat and steam around the door, causing condensation on nearby cabinets.
Door Seal Leakage
Symptom
Oven light works but fan does not run in fan-assisted modes, no error code.
Convection Fan Motor Failure
Symptom
Oven makes loud rattling or grinding noises when the fan is running.
Fan Blade Obstruction or Worn Fan Motor Bearings
Symptom
Range emits a burning smell or smoke the first few times it is used.
Burn-off of Manufacturing Residues
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Electric oven will not heat, display shows E01 shortly after a heating command is selected.
|
Oven Temperature Sensor Circuit Fault | View Details |
| E02 |
Oven overheats or shuts off with E02 displayed, sometimes accompanied by a strong heat surge.
|
Oven Overtemperature / Sensor Range Error | View Details |
| E03 |
Electric oven does not heat and E03 appears shortly after start, fan may run but no elements energize.
|
Oven Heating Circuit Failure | View Details |
| E04 |
Induction cooktop zone will not heat and E04 is displayed for that zone.
|
Induction Power Module Overtemperature / Cooling Fault | View Details |
| E05 |
Induction hob zone does not start, beeps, and shows E05 when a pan is placed.
|
Induction IGBT / Power Stage Fault | View Details |
| E06 |
Induction hob shows E06 and all zones are disabled.
|
Hob Glass Surface Temperature Sensor Fault | View Details |
| E07 |
Induction hob displays E07 and does not respond to touch controls.
|
Touch Control Panel Communication Error | View Details |
| E08 |
Induction hob zone shuts down with E08 when used at high power for several minutes.
|
Induction Zone Overcurrent / Pan Detection Anomaly | View Details |
| E09 |
Induction hob shows E09 and all zones are locked out.
|
Internal Hob Electronics Fault | View Details |
| E10 |
Induction hob displays E10 and beeps when turned on, no zones can be activated.
|
Supply Voltage Out of Range | View Details |
| E11 |
Induction hob zone flashes E11 when a pan is placed and does not heat.
|
Pan Detection Failure | View Details |
| E12 |
Induction hob shows E12 intermittently, often after long cooking sessions.
|
Hob Internal Overtemperature Protection | View Details |
| E20 |
Electric oven display shows E20 and the cooling fan runs continuously, oven may not heat.
|
Oven Cavity Temperature Sensor / Cooling System Fault | View Details |
| E21 |
Electric oven shows E21 and the convection (fan) function does not operate correctly.
|
Convection Fan Motor / Feedback Fault | View Details |
| E30 |
Gas hob with electronic ignition shows E30 on the display and burners will not ignite automatically.
|
Ignition System Fault | View Details |
| E31 |
Gas hob with flame supervision shows E31 and gas supply to one or more burners is cut off shortly after ignition.
|
Flame Failure Device / Thermocouple Fault | View Details |
| E40 |
Electric range display shows E40 and none of the oven functions can be selected.
|
User Interface / Keypad Fault | View Details |
| E41 |
Electric range shows E41 and the clock/timer functions erratically or reset themselves.
|
Low Voltage / Power Supply to Control Board | View Details |
| E50 |
Electric oven shows E50 and the grill function does not operate.
|
Grill Element / Circuit Fault | View Details |
| E60 |
Electric oven shows E60 and fan-assisted functions are unavailable.
|
Oven Fan Motor / Feedback Error | View Details |
| E70 |
Electric oven shows E70 and interior light does not work, some functions may be disabled.
|
Oven Lamp / Door Status Circuit Fault | View Details |
| – |
Control knobs on the range are very stiff or difficult to turn.
|
Seized Valve Spindle / Contaminated Knob Mechanism | View Details |
| – |
Digital clock/timer on the range does not retain time after a power interruption and must be reset frequently.
|
Control Board Backup / Power Supply Issue | View Details |
| – |
Electric oven does not heat at all, no error code displayed, clock and lights work.
|
Main Oven Heating Circuit Open | View Details |
| – |
Electric oven trips the circuit breaker (RCD/MCB) when turned on.
|
Oven Element Short to Earth | View Details |
| – |
Gas hob burner goes out when the knob is released, even though it lights initially.
|
Flame Failure Device Not Holding | View Details |
| – |
Gas hob burner will not ignite or has a very weak flame, no electronic error code.
|
Gas Burner Ignition / Flame Quality Issue | View Details |
| – |
Gas hob ignition keeps clicking continuously even when all burners are off.
|
Stuck Ignition Switch / Moisture in Ignition System | View Details |
| – |
Gas hob produces a loud popping noise or uneven flame when operating.
|
Incorrect Gas/Air Mixture at Burner | View Details |
| – |
Induction hob controls are unresponsive or randomly change settings without any error code.
|
Touch Control Panel Malfunction | View Details |
| – |
Induction hob does not detect any pans on one specific zone, but other zones work.
|
Single Induction Zone Detection Failure | View Details |
| – |
Induction hob zone intermittently shuts off or reduces power without any error code.
|
Induction Zone Thermal / Power Management Limiting | View Details |
| – |
Oven door glass becomes excessively hot to touch during normal operation.
|
Door Cooling / Insulation Inefficiency | View Details |
| – |
Oven door will not close fully, heat escapes around the edges, no error code.
|
Door Hinge / Seal Misalignment | View Details |
| – |
Oven heats but temperature is significantly inaccurate (too hot or too cold) without any error code.
|
Oven Temperature Calibration / Sensor Drift | View Details |
| – |
Oven interior light does not work, but oven heats normally.
|
Oven Lamp Failure | View Details |
| – |
Oven leaks heat and steam around the door, causing condensation on nearby cabinets.
|
Door Seal Leakage | View Details |
| – |
Oven light works but fan does not run in fan-assisted modes, no error code.
|
Convection Fan Motor Failure | View Details |
| – |
Oven makes loud rattling or grinding noises when the fan is running.
|
Fan Blade Obstruction or Worn Fan Motor Bearings | View Details |
| – |
Range emits a burning smell or smoke the first few times it is used.
|
Burn-off of Manufacturing Residues | View Details |
No matching codes found
Advertisements