Amica Door Cooling / Insulation Inefficiency

Oven door glass becomes excessively hot to touch during normal operation.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed door cooling fan, Blocked cooling air vents, Damaged inner glass or door seal, Incorrect installation flush with cabinetry

How to Fix / Troubleshooting

Safety first: Allow the oven to cool before touching or disassembling the door.

  • Check cooling vents: Ensure that the vents above and below the oven door are not blocked by trim or objects.
  • Cooling fan test: During operation, listen for the door cooling fan. If it does not run or is very noisy, it may need replacement.
  • Inspect door glass: Check for cracks or gaps between the inner and outer glass panels. Replace damaged glass assemblies.
  • Door seal: Inspect the door gasket for damage that could allow excessive heat to escape. Replace if necessary.
  • Installation check: Verify that the oven is installed with the clearances specified by Amica to allow proper airflow around the cabinet.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Door Cooling Fan
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements