Amica
Convection Fan Motor Failure
Oven light works but fan does not run in fan-assisted modes, no error code.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Burned-out fan motor, Jammed fan blade, Faulty function selector switch contact, Broken fan wiring
How to Fix / Troubleshooting
Safety first: Disconnect mains power and allow the oven to cool.
- Check fan obstruction: Remove the inner rear panel and inspect the fan blade for obstructions. Clear any debris.
- Spin test: Rotate the fan by hand. If stiff or seized, replace the convection fan motor.
- Continuity test: Access the motor terminals from the rear and measure resistance. An open circuit indicates a failed motor.
- Selector switch: On models with a mechanical selector, test the fan contacts for continuity in fan modes. Replace the function selector switch if the fan contact is open.
- Reassemble and test: After replacing the motor or switch, test fan-assisted modes to confirm operation.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Convection Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements