Beko
Main Oven Heating Circuit Failure
Electric oven does not heat in any mode, but the clock and light work.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open bake element, open grill element, tripped or failed thermal cutoff, faulty function selector switch, wiring fault to elements
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before removing panels.
- Check timer settings: Ensure the clock is set and the oven is not in automatic or delayed start mode.
- Test elements: Inspect visible elements for breaks. Remove rear panel and test each element for continuity with a multimeter.
- Check thermal cutoff: Locate the thermal cutoff or safety thermostat on the oven cavity. Test for continuity; replace if open.
- Inspect selector switch: Verify that the function selector is not burned or loose. Replace if contacts are faulty.
- Repair wiring: Repair or replace any burned or loose wires between the control board, selector switch, and elements.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Heating Element (Bake) or Thermal Cutoff
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements