Beko
Convection (Fan) Element Failure
Electric oven fan runs but there is no heat in fan-assisted mode.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open convection element around fan, burned wiring to fan element, faulty function selector not energizing fan element
How to Fix / Troubleshooting
Safety first: Isolate power before removing the rear oven panel.
- Access fan element: Remove the rear cover inside the oven cavity to expose the circular fan element.
- Inspect element: Look for breaks or burn marks on the circular element.
- Test continuity: Disconnect one terminal and measure resistance across the element. Infinite resistance indicates failure.
- Check wiring: Inspect wires and terminals for heat damage and repair as needed.
- Replace element: Fit a new convection element of the correct rating for your Beko model and reassemble.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Convection Fan Element
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements