Beko
Temperature Regulation / Sensor or Element Degradation
Electric oven heats but does not reach the set temperature or cooks unevenly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging bake element with hot spots, faulty temperature sensor, convection fan not running, poor door seal
How to Fix / Troubleshooting
Safety first: Disconnect power before testing internal components.
- Verify with thermometer: Place an oven thermometer inside and compare actual temperature to the set temperature.
- Check convection fan: In fan-assisted modes, ensure the fan runs. Replace the fan motor if it does not operate.
- Inspect door seal: Check the door gasket for gaps, tears, or compression. Replace if damaged.
- Test sensor and elements: Measure resistance of the temperature sensor and elements. Replace any components out of specification.
- Calibrate if available: Some Beko models allow temperature calibration via the control panel; refer to the user manual.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Temperature Sensor (NTC Probe)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements