E30
Beko
Clock / Timer Module Fault
Electric oven display shows E30 and the clock/timer may reset or behave erratically.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed electronic timer module, loose connectors to timer, internal power supply fault in timer, surge damage
How to Fix / Troubleshooting
Safety first: Disconnect the appliance from mains power before removing the control panel.
- Reset power: Turn off the breaker for 1–2 minutes, then restore power to see if the error clears.
- Access timer: Remove the front control panel to access the clock/timer module. Check that all connectors are fully seated.
- Inspect for damage: Look for burn marks or swollen components on the timer PCB. If present, the module must be replaced.
- Replace timer: Transfer any wiring one connector at a time from the old timer to the new one to avoid miswiring. Reassemble and set the time; many Beko ovens will not operate until the clock is set.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Electronic Clock/Timer Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements