Beko User Interface Keypad / Touch Panel Fault

Range control panel buttons are unresponsive or intermittent.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn membrane keypad, cracked touch glass, loose ribbon cable, moisture ingress into control panel

Safety first: Disconnect power before removing the control panel.

Dry panel: If the issue followed cleaning or a spill, allow the panel to dry thoroughly.
Reseat ribbon cable: Remove the control panel and reseat the ribbon cable between the keypad and control board.
Inspect keypad: Look for cracks, delamination, or worn areas on the keypad. Replace the keypad or entire control panel assembly if damaged.
Test operation: After reassembly, test all buttons. If still intermittent, the main control board may also need replacement.

Medium 3/5

User Interface Keypad / Touch Panel

Check Price on Amazon

We may earn a commission from links on this page.