F60
Blomberg
Convection Fan Motor Fault
F60 error on dual-fuel or electric range; convection fan does not run.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed convection fan motor, Obstructed fan blade, Faulty relay on EOC, Broken wiring to fan motor
How to Fix / Troubleshooting
Safety first: Disconnect power and allow the oven to cool before accessing the rear or interior fan cover.
- Check fan operation: Start a convection mode and listen for fan noise. If silent, proceed to inspection.
- Inspect fan blade: Remove the interior fan cover and check for food debris or warped panels rubbing the blade.
- Test motor: From the rear, access the fan motor terminals and measure resistance. An open circuit indicates a failed motor.
- Check wiring and relay: Inspect wiring from the EOC to the fan motor. If wiring is intact and the motor is good, the EOC relay may be defective.
- Replace fan motor: Install a new convection fan motor if it is seized, noisy, or open.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Convection Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements