Oven does not heat in bake mode but broil works.

Safety first: Turn off power at the breaker before removing the oven back panel or element.

• Visual inspection: Look at the bake element inside the oven for blisters, breaks, or burn marks.
• Test continuity: Remove at least one wire from the bake element and measure resistance. An open reading indicates a failed element.
• Check rear connections: From the back of the range, inspect the element terminals and wiring for burns or loose connections. Repair as needed.
• Replace element: Install a new Blomberg bake element if it is defective. If the element and wiring are good, the EOC bake relay may be faulty and require replacement.