Blomberg Failed Broil Element or Broil Circuit

Oven does not heat in broil mode but bake works.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open broil element, Burned wiring at broil terminals, Faulty broil relay on EOC, Loose broil element mounting causing poor contact

Safety first: Disconnect power before working near the broil element.

Inspect broil element: Look for visible damage or breaks.
Test continuity: Disconnect one wire and measure resistance. Replace the element if open.
Check wiring: Inspect connections at the element and at the rear of the oven for heat damage.
Replace EOC: If the element and wiring are fine but broil still does not work, the broil relay on the EOC may be defective and the board should be replaced.

Medium 3/5

Broil Heating Element

Check Price on Amazon

We may earn a commission from links on this page.