F06
Brandt
Oven Control Board / User Interface Fault
Brandt oven displays F06 and the display or controls behave erratically.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty electronic oven control (EOC), Stuck keypad, Moisture behind control panel, Loose ribbon cable
How to Fix / Troubleshooting
Safety first: Isolate the range from mains before removing the control panel.
Steps:
- Dry and clean: If the error appeared after cleaning, moisture may be inside the control panel. Allow the unit to dry for several hours with the door open.
- Power reset: Turn off the breaker for 10 minutes, then restore power and test.
- Inspect connections: Remove the control panel and check the ribbon cable between the keypad and control board. Reseat it carefully.
- Check for corrosion: Look for signs of liquid damage on the PCB. Minor corrosion can sometimes be cleaned with electronics cleaner; severe damage requires board replacement.
- Replace control: If F06 persists and keys remain unresponsive or random, replace the electronic oven control with the correct Brandt part.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Electronic Oven Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements